469375079 发表于 2010-4-21 00:01:14

SATTOOLS 花45元钱买来的！

希望对你们有用！！

jyyf 发表于 2010-4-21 02:59:02

看哈是啥东东.....................

jackwei057 发表于 2010-4-21 07:08:11

什么东西啊，

syzdq 发表于 2010-4-21 08:39:01

20年前的东西吧？现在的SEATOOLS升级了不知道多少次了。
大家看下它的README：

*****************************************************************
                          README.DOC
Disk Technician Factory Test for Seagate Drives Version 1.22
This test correlates to Seagate Disk Repair Center testing.

This document contains information about major changes which have
been included in this new version.
*****************************************************************
TABLE OF CONTENTS:

1.0   Most Drives Now Automatically Recognized and Tested.
2.0   Defective Media Locations Now Automatically Removed From
      Service.
3.0   User's Guide Now On Diskette -- How To Print A Copy.
*****************************************************************

1.0   Most Drives Now Automatically Recognized and Tested.

      Virtually all Seagate IDE, SCSI, SCSI-1, SCSI-2, Fast
      SCSI-2 and ST506/412 (MFM/RLL) drives will now be
      automatically recognized and tested by Disk Technician
      Factory Test For Seagate Drives version 1.22.

      This will greatly enhance the value of Factory Test in
      eliminating No Problem Found (NPF) drives in the field.

      Please refer to Appendix A in the file MANUAL.DOC
      (included in the Factory Test software files) for a
      complete listing of eligible drives, plus the matching
      controller or adapter recommended for testing each drive.

2.0   Defective Media Locations Now Automatically Marked Bad.

      Many Factory Test users requested that we add the ability
      to automatically mark-out any media defects detected by
      Factory Test's "Quick Test" and/or "Media Certification."

      Version 1.22 adds this important feature.

      Once testing has finished, any media defect locations
      identified by Factory Test (as shown in the "Quick Test
      Report" and/or "Media Defect Report") can be automatically
      marked "bad" and removed from service. To do this, simply
      high-level format the drive under the desired operating
      system (DOS, UNIX, Macintosh, etc.).

3.0   User's Guide Now On Diskette -- How To Print A Copy.

      In order to put changes into effect more rapidly, the
      User's Guide is now contained in a file called MANUAL.DOC
      and is included on the Factory Test diskette.

      To print a copy of the User's Guide, type the following
      from the system prompt:

        COPYA:\MANUAL.DOCPRN

      and then press the Enter key (be sure the printer is on
      and connected).

*******************************END*******************************

yangxh 发表于 2010-4-27 01:27:44

很老，很黄，呵呵

wxlogo888 发表于 2010-4-27 07:42:55

你的ST的盘多少转？

wangdi 发表于 2010-4-27 09:38:34

能不能说说是什么东西，做什么用的？

ubjmgo 发表于 2010-4-27 14:12:13

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

ubjmgo 发表于 2010-4-27 14:12:20

+++++++++++++++++++++++++++++

yinzhixong 发表于 2010-4-29 00:42:00

看哈是啥东东.....................
页: [1] 2 3
查看完整版本: SATTOOLS 花45元钱买来的！