顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶
本帖最后由 hzxok 于 2013-3-10 02:33 编辑
帖子顶起50就更新一次,这次更新ST11 12坏道通用加表，下次更新11 12通用处理红绿快.顶下去就更新下去还有单跑流程，B级自修复固件等。不懂的就加群205349832我有时间就和大家解释。密码520520520
错误C4090081是可以修复的，大家可以想象有多少是可以修复的硬盘了吧！详情等更新。
补充：挣对11的盘在2级F指令加表后，接着G转P效果更好
F3 2>A0 (single cylinder, single head)
F3 2>A1 (single cylinder, sequential heads)
F3 2>A2 (sequential inward cylinders, single head)
F3 2>A3 (sequential inward cylinders, sequential heads)
F3 2>A5 (single cylinder, random heads)
F3 2>A6 (random cylinders, single head)
F3 2>A7 (random cylinders, random heads)
F3 2>A12 (sequential inward even cylinders, single head)
F3 2>A13 (sequential inward even cylinders, sequential heads)
F3 2>A22 (sequential inward odd cylinders, single head)
F3 2>A23 (sequential inward odd cylinders, sequential heads)
F3 2>A16 (random even cylinders, single head)
F3 2>A17 (random even cylinders, random heads)
F3 2>A26 (random odd cylinders, single head)
F3 2>A27 (random odd cylinders, random heads)
F3 2>A42 (sequential outward cylinders, single head)
F3 2>A43 (sequential outward cylinders, sequential heads)
F3 2>A52 (sequential outward even cylinders, single head)
F3 2>A53 (sequential outward even cylinders, sequential heads)
F3 2>A62 (sequential outward odd cylinders, single head)
F3 2>A63 (sequential outward odd cylinders, sequential heads)
The following commands set the Test Space limits:
F3 2>A8,123,,0 (sets the minimum user logical cylinder for head 0 to 123)
F3 2>A9,234,,0 (sets the maximum user logical cylinder for head 0 to 234)
F3 2>A8,567,,1 (sets the minimum user logical cylinder for head 1 to 567)
F3 2>A9,890,,1 (sets the maximum user logical cylinder for head 1 to 890)
F3 2>A8,11,1,0 (sets the minimum system logical cylinder for head 0 to 11)
F3 2>A9,23,1,0 (sets the maximum system logical cylinder for head 0 to 23)
F3 2>A8,567,2,0 (sets the minimum physical cylinder for head 0 to 567)
F3 2>A9,876,2,0 (sets the maximum physical cylinder for head 0 to 876)
F3 2>AA,3 (sets the maximum head to 3)
F3 2>AB,4567 (sets the minimum user LBA to 4567)
F3 2>AC,9876 (sets the maximum user LBA to 9876)
F3 2>AB,223,1 (sets the minimum system LBA to 223)
F3 2>AC,7845,1 (sets the maximum system LBA to 7845)
F3 2>AE,1 (sets the minimum head to 1)
The following command resets the Test Space to its default state:
F3 2>AD
The following command sets the Target Buffer Sector Offset to 0
F3 2>AF,0
Revision History:
顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶
支持学习支持学习支持学习
顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶
顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶
顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶
靠这样了呀，真是的穷人无办呀。
已经买过了。还要花钱吗
。。。。。。。。。。。。，
