发表F3官方指令中没有的独家指令更新中（以更新一段）

wdtcp · 发表于 2013-5-2 10:56:25

顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶

wdtcp · 发表于 2013-5-2 10:58:19

本帖最后由 hzxok 于 2013-3-10 02:33 编辑

帖子顶起50就更新一次,这次更新ST11 12坏道通用加表，下次更新11 12通用处理红绿快.顶下去就更新下去还有单跑流程，B级自修复固件等。不懂的就加群205349832我有时间就和大家解释。密码520520520
错误C4090081是可以修复的，大家可以想象有多少是可以修复的硬盘了吧！详情等更新。
补充：挣对11的盘在2级F指令加表后，接着G转P效果更好

F3 2>A0          (single cylinder, single head)
   F3 2>A1          (single cylinder, sequential heads)
   F3 2>A2          (sequential inward cylinders, single head)
   F3 2>A3          (sequential inward cylinders, sequential heads)
   F3 2>A5          (single cylinder, random heads)
   F3 2>A6          (random cylinders, single head)
   F3 2>A7          (random cylinders, random heads)

   F3 2>A12       (sequential inward even cylinders, single head)
   F3 2>A13       (sequential inward even cylinders, sequential heads)
   F3 2>A22       (sequential inward odd cylinders, single head)
   F3 2>A23       (sequential inward odd cylinders, sequential heads)

   F3 2>A16       (random even cylinders, single head)
   F3 2>A17       (random even cylinders, random heads)
   F3 2>A26       (random odd cylinders, single head)
   F3 2>A27       (random odd cylinders, random heads)

   F3 2>A42       (sequential outward cylinders, single head)
   F3 2>A43       (sequential outward cylinders, sequential heads)
   F3 2>A52       (sequential outward even cylinders, single head)
   F3 2>A53       (sequential outward even cylinders, sequential heads)
   F3 2>A62       (sequential outward odd cylinders, single head)
   F3 2>A63       (sequential outward odd cylinders, sequential heads)

The following commands set the Test Space limits:

   F3 2>A8,123,,0 (sets the minimum user logical cylinder for head 0 to 123)
   F3 2>A9,234,,0 (sets the maximum user logical cylinder for head 0 to 234)
   F3 2>A8,567,,1 (sets the minimum user logical cylinder for head 1 to 567)
   F3 2>A9,890,,1 (sets the maximum user logical cylinder for head 1 to 890)
   F3 2>A8,11,1,0 (sets the minimum system logical cylinder for head 0 to 11)
   F3 2>A9,23,1,0 (sets the maximum system logical cylinder for head 0 to 23)
   F3 2>A8,567,2,0 (sets the minimum physical cylinder for head 0 to 567)
   F3 2>A9,876,2,0 (sets the maximum physical cylinder for head 0 to 876)
   F3 2>AA,3       (sets the maximum head to 3)
   F3 2>AB,4567    (sets the minimum user LBA to 4567)
   F3 2>AC,9876    (sets the maximum user LBA to 9876)
   F3 2>AB,223,1    (sets the minimum system LBA to 223)
   F3 2>AC,7845,1 (sets the maximum system LBA to 7845)
   F3 2>AE,1       (sets the minimum head to 1)

The following command resets the Test Space to its default state:

   F3 2>AD

The following command sets the Target Buffer Sector Offset to 0

   F3 2>AF,0

  Revision History: