当前位置：技术论坛 › 硬盘维修技术论坛 › 希捷硬盘Seagate › 帮忙看看这个.7的盘的自效准02的提示

[讨论] 帮忙看看这个.7的盘的自效准02的提示

[复制链接]
lsh88528
  • TA的每日心情
    开心
    2019-3-19 09:56

    • 签到天数: 4 天

    [LV.2]九品芝麻官

    5

    主题

    538

    回帖

    209

    积分

    [INTOHARD]排长

    Rank: 3Rank: 3

    积分
    209
    发表于 2009-8-23 00:42:06 | 显示全部楼层 |阅读模式
    这个盘是1头坏，现在磁头顺序是0.2.1
    开SF后就出现了这个好像是3头也挂了！！！
    T>/8
    8>C20
    (SN: 3JT3Q04F)
    8>/t
    T>#,,22
    Enter Drive S/N  3JV3Q04F
    Enter Packwriter S/N
    T>
    :6000000020000000  AX`3JV3Q04F  "000000000000"0E306-0E385
    SRAM Ovly = Diag

    T>N2,AA,22
    T>No valid SeaDex script in buffer.
    Begin Test 02
    ASCII logging on

                          Not Power Cycling

                          Not Power Cycling
    Zone 00 Head 00 adaptives set to defaults
    Zone 00 Head 01 adaptives set to defaults
    Zone 01 Head 00 adaptives set to defaults
    Zone 01 Head 01 adaptives set to defaults
    Zone 02 Head 00 adaptives set to defaults
    Zone 02 Head 01 adaptives set to defaults
    Zone 03 Head 00 adaptives set to defaults
    Zone 03 Head 01 adaptives set to defaults
    Zone 04 Head 00 adaptives set to defaults
    Zone 04 Head 01 adaptives set to defaults
    Zone 05 Head 00 adaptives set to defaults
    Zone 05 Head 01 adaptives set to defaults
    Zone 06 Head 00 adaptives set to defaults
    Zone 06 Head 01 adaptives set to defaults
    Zone 07 Head 00 adaptives set to defaults
    Zone 07 Head 01 adaptives set to defaults
    Zone 08 Head 00 adaptives set to defaults
    Zone 08 Head 01 adaptives set to defaults
    Zone 09 Head 00 adaptives set to defaults
    Zone 09 Head 01 adaptives set to defaults
    Zone 0A Head 00 adaptives set to defaults
    Zone 0A Head 01 adaptives set to defaults
    Zone 0B Head 00 adaptives set to defaults
    Zone 0B Head 01 adaptives set to defaults
    Zone 0C Head 00 adaptives set to defaults
    Zone 0C Head 01 adaptives set to defaults
    Zone 0D Head 00 adaptives set to defaults
    Zone 0D Head 01 adaptives set to defaults
    Zone 0E Head 00 adaptives set to defaults
    Zone 0E Head 01 adaptives set to defaults
    Zone 0F Head 00 adaptives set to defaults
    Zone 0F Head 01 adaptives set to defaults
    Head Mask 000F -
    Read Bias - Head      0   1   2   3
                          B   B

    HiTemp Bias Head      0   1   2   3
                          B   B
    Head Mask 000F - Switch to full int.
                  Spin Ready
    Ref Trk Tan Timing Skew (h0 to h0) = 0000 servo clocks.
    ID-OD Delta Timing Skew (h0 to h0) = 0000 servo clocks.
    Ref Trk Tan Timing Skew (h0 to h1) = 0000 servo clocks.
    ID-OD Delta Timing Skew (h0 to h1) = 0000 servo clocks.
    Ref Trk Tan Timing Skew (h0 to h2) = 0000 servo clocks.
    ID-OD Delta Timing Skew (h0 to h2) = 0000 servo clocks.
    Ref Trk Tan Timing Skew (h0 to h3) = 0000 servo clocks.
    ID-OD Delta Timing Skew (h0 to h3) = 0000 servo clocks.
    Calibrating Physical Track 0 on heads 0 thru 1


    Radial Offset Table:

    Head 0    Offset = 0
    Head 1    Offset = 0
    Head 2    Offset = 0
    Head 3    Offset = 0

    SkpCylList deleted  
    Sys= 0F68E-0F70D   0280 SPTK on sys trks
    <empty>
    drive must be reformatted
    Skipping MDW oversample s/n cylinders.
    Zone 00:  00018 - 00BE8  1100 (044C) 683.439
    Zone 01:  00BE9 - 027FE  1056 (0420) 666.63
    Zone 02:  027FF - 04707  1026 (0402) 646.275
    Zone 03:  04708 - 06CA3   990 (03DE) 622.431
    Zone 04:  06CA4 - 08B66   953 (03B9) 602.353
    Zone 05:  08B67 - 0A479   916 (0394) 580.392
    Zone 06:  0A47A - 0C405   880 (0370) 545.882
    Zone 07:  0C406 - 0D99A   836 (0344) 527.59
    Zone 08:  0D99B - 0ECD9   806 (0326) 506.144
    Zone 09:  0ECDA - 10337   770 (0302) 480.724
    Zone 0A:  10338 - 11397   733 (02DD) 461.672
    Zone 0B:  11398 - 12854   691 (02B3) 437.423
    Zone 0C:  12855 - 13F38   660 (0294) 410.353
    Zone 0D:  13F39 - 14AE7   623 (026F) 396.401
    Zone 0E:  14AE8 - 155D6   605 (025D) 383.316
    Zone 0F:  155D7 - 16358   572 (023C) 363.922
    Sys= 0F68E-0F70D   0280 SPTK on sys trks
    Total LBAs = 095333FC
    EP=1, TA=1, HiGain=1, OTRd=1, Early Rd=0, Splash=1, Reload=1, NPML=1, MRBias=1
    Bst/Zap=1, SrvoThrsh=1, RunOut=1, MaxECC=1, ECC 2=1, ECC 1=1, ECC 0=1
    Data=FF, Write=80, ID=FF
    No entries in Log
    All Hds 0-1, All Cyls 00018-16358, Rnd data

    Performing AFC Zone Cal
    ACFC Calibration:
                CRRO Orders Prior to Cal: (PES*2)^2
      Cyl.Hd    2    3    4    5    6    7    8   12   24
    00018.00 0028 001d 0002 0001 0000 0001 0000 0009 0001
    02000.00 002d 0011 0005 0001 0000 0000 0009 0002 0001
    04000.00 0028 001d 0008 0000 0000 0000 0001 0004 0001
    06000.00 0028 001a 0008 0001 0000 0009 0001 0001 0000
    08000.00 0028 0025 000d 0001 0000 0000 0000 0000 0001
    0a000.00 0028 0019 0008 0001 0001 0000 0001 0009 0001
    0e000.00 0028 0031 0019 0001 0000 0000 0001 0001 0004
    10000.00 002d 0031 0019 0001 0000 0001 0000 0000 0001
    12000.00 003a 0032 0012 0001 0002 0001 0002 0000 0001
    14000.00 003a 0032 0029 0010 000d 0001 0001 0001 0004
    16000.00 0041 006d 0062 001d 0022 000a 0002 0002 0005
    00018.01 0034 0000 0005 0001 0000 0001 0001 0001 0004
    02000.01 0020 0000 0005 0001 0001 0000 0004 0004 0004
    04000.01 0019 0000 0001 0001 0000 0001 0001 0004 0004
    06000.01 0019 0001 0001 0002 0000 0000 0000 0001 0004
    08000.01 0019 0001 0004 0000 0000 0000 0001 0000 0004
    0a000.01 0019 0000 0005 0001 0000 0002 0001 0000 0004
    0e000.01 000d 0000 0004 0004 0000 0001 0001 0000 0001
    10000.01 0019 0001 0009 0009 0000 0001 0000 0000 0001
    12000.01 0014 0001 0014 000d 0000 0004 0001 0001 0001
    14000.01 0019 0001 0019 001a 0000 000a 0004 0000 0004
    16000.01 0019 0002 0029 0035 0001 0014 0004 0005 0001
    RTE Amplitude = 0001 servo clocks. Sector = 007Dh. Trk/2 = B2B3h.
    RTE Amplitude = 0000 servo clocks. Sector = 005Bh. Trk/2 = 8EF8h.
    RTE Amplitude = 0000 servo clocks. Sector = 004Dh. Trk/2 = 6B3Dh.
    RTE Amplitude = 0000 servo clocks. Sector = 004Dh. Trk/2 = 4782h.
    RTE Amplitude = 0000 servo clocks. Sector = 003Dh. Trk/2 = 23C7h.
    RTE Amplitude = 0000 servo clocks. Sector = 0050h. Trk/2 = 000Ch.
    EP=0, TA=0, HiGain=0, OTRd=0, Early Rd=0, Splash=0, Reload=0, NPML=0, MRBias=0
    Bst/Zap=0, SrvoThrsh=0, RunOut=0, MaxECC=0, ECC 2=1, ECC 1=1, ECC 0=1
    Data=02, Write=40, ID=1E
    Channel Srvo Table
      Head   Addr   VGA  SATT  Tap5  Tap6  Tap3  Tap7  Tap2  Tap8  Tap9  RATT   XDC   
        00   F7F2    2D    02    5C    C4    9E    A0    50    98    60    41    5A   
        01   F808    2D    02    5C    C4    9E    A0    50    98    60    41    5A   
    Adapt Servo Zone 08
    Adapt Servo 0000e33a.00
    Adapts Loaded
    Dbck DATA load


    NPML       00
    Test 0000e33a.00 00010b30 BER 00000006
    Adjust ATTR 01 VGAS 48 VGAR b7 FREQR 84 SRVTEST 41
    fail lower limit

    MRASYM     80 000119c0 BER 00000005
    MRASYM     66 00010d36 BER 00000005 update 66 hold  
    Zone  8 [0000D9A3.0,FC64,0264,C0]
        Left Bath = FF2E, Right Bath = FFB6 : Pick (FF72) ( Min/Max AGC A7FF )
    Zone  9 [0000ECE2.0,FD05,0305,C0]
        Left Bath = FFCF, Right Bath = 0061 : Pick (0018) ( Min/Max AGC A0FF )
    Test 0000e33a.00 0000fdaf BER 00000fff
    Zone  0 [00000020.0,F689,FC89,C0]
        Left Bath = F997, Right Bath = FA2F : Pick (F9E3) ( Min/Max AGC 9AFF )
    Zone  1 [00000BF1.0,F6D4,FCD4,C0]
        Left Bath = F9E2, Right Bath = FA77 : Pick (FA2C) ( Min/Max AGC 9CFF )
    Test 00000bc8.00 000157b2 BER 00000fff
    Test 00000bc8.00 00014cf4 BER 00000fff
    Test 0000e33a.00 0000fc78 BER 00000fff
    Adjust ATTR 01 VGAS 47 VGAR b4 FREQR 7f SRVTEST 41
    fail lower limit

    MRASYM     66 0000ff3e BER 00000fff
    MRASYM     6c 0000fd75 BER 00000fff update 6c hold  
    Default Tap Weight 00000000 Settle Tap Weight 00000154
    XDCTAP     5a 0001c231 BER 00000000 adapt
    XDCTAP     77 0001a325 BER 00000000 hold  

    CUTOFF  Lower 0022  Upper 013b  Step 0003  Right 18  Mask 0008
    Default  0127 0001a013 BER 00000000
    Floor  1   0f 0001a4d8 0001dccd
    Left   1 0128 00019d67
    Middle 1 0131 00018d10
    Right  1 013b 00018045
    Lowest 1 013a 00018045
    New      0131 00018a17 BER 00000000

    SV TAP5 Lower 0020  Upper 00df  Step 0006  Right 1f  Mask 1000
    Default  005c 0001a2ff BER 00000000
    Floor  1   20 0001a36e 0001a36e
    Left   1 0020 0001a0cf
    Middle 1 007f 0001a34a
    Right  1 00df 0001a1ca
    Lowest 1 00b6 0001a0af
    Curve    Size Bathtub
    New      007f 0001a3c0 BER 00000000
    0001a543 BER 00000000 _ATT 01 VGAS 48 VGAR 53 FREQR 81 Taps frozen read adapt
    Current Tap Weight 0000257a diff ffffda86 tap limits
    0001a702 BER 00000000 _ATT 01 VGAS 48 VGAR 51 FREQR 7f Taps frozen read adapt
    Current Tap Weight 0000002a diff 00002550 tap limits
    0001a507 BER 00000000 _ATT 01 VGAS 49 VGAR 53 FREQR 7b Taps frozen read adapt
    Current Tap Weight 00000009 diff 00000021 Save servo Force servo update
    Dbck Default  DATA load

    Test 0000e33a.00 0000fab5 BER 00000fff
    Adapt Servo 0000e33a.01
    Adapts Loaded
    Dbck DATA load


    NPML       00
    Test 0000e33a.01 WRITE FAILED
    Dbck Default  DATA load

    Test 0000e33a.01 WRITE FAILED
    Adapt Servo 0000e35a.01
    Adapts Loaded
    Dbck DATA load


    NPML       00
    Test 0000e35a.01 WRITE FAILED
    Dbck Default  DATA load

    Test 0000e35a.01 WRITE FAILED
    Adapt Servo 0000e37a.01
    Adapts Loaded
    Dbck DATA load


    NPML       00
    Test 0000e37a.01 WRITE FAILED
    Dbck Default  DATA load

    Test 0000e37a.01 WRITE FAILED
    Adapt Servo 0000e39a.01
    Adapts Loaded
    Dbck DATA load


    NPML       00
    Test 0000e39a.01 WRITE FAILED
    Dbck Default  DATA load

    Test 0000e39a.01 WRITE FAILED

    FAILED SERVO Zone 08 Head 01 Error 00cd
    Zone  8 [0000D9A3.0,FC72,0272,C0]
        Left Bath = FF2A, Right Bath = FFB8 : Pick (FF71) ( Min/Max AGC A7FF )
    Zone  9 [0000ECE2.0,FD18,0318,C0]
        Left Bath = FFCC, Right Bath = 0062 : Pick (0017) ( Min/Max AGC 9FFF )
    Zone  8 [0000D9A3.1,FC64,0264,C0]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000D9CB.1,FC64,0264,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000D9F3.1,FC64,0264,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000DA1B.1,FC64,0264,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000DA43.1,FC64,0264,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000DA6B.1,FC64,0264,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrRetry to find bath using coarse offset
    [0000DA8B.1,FB64,0364,F2]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000DAB3.1,FB64,0364,F2,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000DADB.1,FB64,0364,F2,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000DB03.1,FB64,0364,F2,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000DB2B.1,FB64,0364,F2,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000DB53.1,FB64,0364,F2,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err    Left Bath = FB40, Right Bath = FB87 : Pick (FB63) ( Min/Max AGC E1F4 )
    Zone  9 [0000ECE2.1,FD05,0305,C0]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000ED0A.1,FD05,0305,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000ED32.1,FD05,0305,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000ED5A.1,FD05,0305,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000ED82.1,FD05,0305,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000EDAA.1,FD05,0305,C0,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrRetry to find bath using coarse offset
    [0000EDCA.1,FC05,0405,EF]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000EDF2.1,FC05,0405,EF,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000EE1A.1,FC05,0405,EF,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000EE42.1,FC05,0405,EF,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000EE6A.1,FC05,0405,EF,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt Err[0000EE92.1,FC05,0405,EF,83]
    Wrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrWrt ErrASCII logging off
    免费试用数据恢复精灵 - 简单易用、恢复效果一级棒的数据恢复软件 咨询电话：4000089958
    回复

    使用道具 举报

    一缈清雨

    该用户从未签到

    32

    主题

    886

    回帖

    9120

    积分

    [INTOHARD]团长

    Rank: 8Rank: 8

    积分
    9120
    发表于 2009-8-23 08:42:36 | 显示全部楼层
    我来灌水（38：
    本帖评分记录金子 收起 理由
    syzdq -12 恶意灌水
    总评分: 金子 -12 
    共 1 位用户参与了本次评分 |  查看全部评分
    回复 支持 反对

    使用道具 举报

    一缈清雨

    该用户从未签到

    32

    主题

    886

    回帖

    9120

    积分

    [INTOHARD]团长

    Rank: 8Rank: 8

    积分
    9120
    发表于 2009-8-23 08:42:45 | 显示全部楼层
    我来灌水（38：
    免费试用数据恢复精灵 - 简单易用、恢复效果一级棒的数据恢复软件 咨询电话：4000089958
    回复 支持 反对

    使用道具 举报

    一缈清雨

    该用户从未签到

    32

    主题

    886

    回帖

    9120

    积分

    [INTOHARD]团长

    Rank: 8Rank: 8

    积分
    9120
    发表于 2009-8-23 08:43:03 | 显示全部楼层
    我来灌水（38：
    回复 支持 反对

    使用道具 举报

    一缈清雨

    该用户从未签到

    32

    主题

    886

    回帖

    9120

    积分

    [INTOHARD]团长

    Rank: 8Rank: 8

    积分
    9120
    发表于 2009-8-23 08:43:59 | 显示全部楼层
    我来灌水（38：
    免费试用数据恢复精灵 - 简单易用、恢复效果一级棒的数据恢复软件 咨询电话：4000089958
    回复 支持 反对

    使用道具 举报

    一缈清雨

    该用户从未签到

    32

    主题

    886

    回帖

    9120

    积分

    [INTOHARD]团长

    Rank: 8Rank: 8

    积分
    9120
    发表于 2009-8-23 08:44:08 | 显示全部楼层
    我来灌水（38：
    回复 支持 反对

    使用道具 举报

    syzdq
  • TA的每日心情
    奋斗
    2024-2-15 13:03

    • 签到天数: 3919 天

    [LV.Master]三朝元老

    49

    主题

    5293

    回帖

    2万

    积分

    [INTOHARD]旅长

    Rank: 9Rank: 9Rank: 9

    积分
    23569

    特殊贡献奖

    QQ
    发表于 2009-8-23 09:05:06 | 显示全部楼层
    你确定ROM和APP里都改对了？
    如果2头两处不对应，是会写入失败的。否则如果后面也全是逻辑1头写失败，就是物理2头的写头坏了。

    而且光1头坏，直接用x.5x做F级引导后用k砍1头方便多了。
    回复 支持 反对

    使用道具 举报

    小念头

    该用户从未签到

    18

    主题

    142

    回帖

    808

    积分

    [INTOHARD]连长

    Rank: 4

    积分
    808
    发表于 2009-8-23 09:14:52 | 显示全部楼层
    这样是做不过02的啊。。。
    回复 支持 反对

    使用道具 举报

    edison丶

    该用户从未签到

    0

    主题

    276

    回帖

    126

    积分

    [INTOHARD]班长

    Rank: 2

    积分
    126
    发表于 2009-8-23 13:50:07 | 显示全部楼层
    我也来灌水（38：
    本帖评分记录金子 收起 理由
    syzdq -12 恶意灌水
    总评分: 金子 -12 
    共 1 位用户参与了本次评分 |  查看全部评分
    回复 支持 反对

    使用道具 举报

    edison丶

    该用户从未签到

    0

    主题

    276

    回帖

    126

    积分

    [INTOHARD]班长

    Rank: 2

    积分
    126
    发表于 2009-8-23 13:50:13 | 显示全部楼层
    我也来灌水（38：
    回复 支持 反对

    使用道具 举报

    下一页
    123下一页
    刚刚去过
    高级模式
    B Color Image Link Quote Code Smilies
    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

    48小时热帖排行
    快速回复 返回顶部 返回列表