7200.7,SF卡02

浮云聚散

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk    M.14  01-16-03 11:51

Buzz  - Head Mask 000F - Switch to full int.
              Spin Ready
3.04  09-10-03 10:10
(P)PATA Reset
Unknown sector(
T>(( VALID Cert Disk Code Detected - Revision # .133

T>
正在写入SN......完成！/
T>( Cert Table loaded
No valid SeaDex script in buffer.
Begin Test 02
ASCII logging on
                      Not Power Cycling                      Not Power CyclingZone 00 Head 00 adaptives set to
defaults
Zone 00 Head 01 adaptives set to defaults
Zone 01 Head 00 adaptives set to defaults
Zone 01 Head 01 adaptives set to defaults
Zone 02 Head 00 adaptives set to defaults
Zone 02 Head 01 adaptives set to defaults
Zone 03 Head 00 adaptives set to defaults
Zone 03 Head 01 adaptives set to defaults
Zone 04 Head 00 adaptives set to defaults
Zone 04 Head 01 adaptives set to defaults
Zone 05 Head 00 adaptives set to defaults
Zone 05 Head 01 adaptives set to defaults
Zone 06 Head 00 adaptives set to defaults
Zone 06 Head 01 adaptives set to defaults
Zone 07 Head 00 adaptives set to defaults
Zone 07 Head 01 adaptives set to defaults
Zone 08 Head 00 adaptives set to defaults
Zone 08 Head 01 adaptives set to defaults
Zone 09 Head 00 adaptives set to defaults
Zone 09 Head 01 adaptives set to defaults
Zone 0A Head 00 adaptives set to defaults
Zone 0A Head 01 adaptives set to defaults
Zone 0B Head 00 adaptives set to defaults
Zone 0B Head 01 adaptives set to defaults
Zone 0C Head 00 adaptives set to defaults
Zone 0C Head 01 adaptives set to defaults
Zone 0D Head 00 adaptives set to defaults
Zone 0D Head 01 adaptives set to defaults
Zone 0E Head 00 adaptives set to defaults
Zone 0E Head 01 adaptives set to defaults
Zone 0F Head 00 adaptives set to defaults
Zone 0F Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-09)
Head Mask 000F -
Read Bias - Head      0   1   2   3
                      B   B

HiTemp Bias Head      0   1   2   3
                      B   B

P




7代盘，通电
(P)PATA Reset
Unknown sector
在这里要抓紧时间按^Z,不然就进不了T和F。
进T模式开SF就会卡在上面的位置，请大虾指导一下，谢谢！