希捷 ST2000硬盘用F3工具自己玩坏了,求恢复.

cyd132 · 发表于 2016-12-2 00:40:52

  过程:开始硬盘读盘慢,用HDTune 5.0检测出 05 重印扇区计数黄  C5 待映射扇区数黄,于是用网上找到F3专修工具,尝试从新屏蔽坏道. 结果很悲剧...

期间玩坏1块进不了F3  还有1个是要等信息走完才能进F3.

其中一块:

Boot 0x40M

Spin Up

Trans.

Spin Up
RW subfile error 2046
RW subfile error 2046
SIM Error 2046 LBA 0000000000090AAD FD FC358028
RW Error 00000080

MCMainPOR: Start:

User Data Base  00440980

Check MCMT Version: Current

MC026: Reconstruction: MCMT Reconstruction Start

[RSRS] 0000

Starting LBA of RW Request=0000001BD0  Length=00000762

ProcessRWError -Read- at LBA 0000001BD0  Sense Code=43110081

InitiateMarkPendingReallocateRequest for disc_lba: 0000001BD0!

ErrorSegment 0000

MultiReadXfrStatus 0000  0001  ErrorSegment 0000

MC001: Reconstruction: EXCEPTION: Segment Read Failed

MC002: Reconstruction: EXCEPTION: Error in Header

MC006: Reconstruction: EXCEPTION: Error in first Header Disc Sector

ReadFooters (Backwards):  Segment 0000  SegmentStartLBA 0000001BD0  FooterLBA 00001C9C

Sequ 00000001

Starting LBA of RW Request=0000001C9C  Length=00000006

ProcessRWError -Read- at LBA 0000001C9C  Sense Code=43110081

InitiateMarkPendingReallocateRequest for disc_lba: 0000001C9C!

..........................................其中几页都是这些
最后的一条

Starting LBA of RW Request=00000001B8  Length=00000004

ProcessRWError -Read- at LBA 00000001B8  Sense Code=43110081

ERC TO exceeded, orig value in us:FFFFFFFF

MSP LPCDiscXfrScratchPadSegment detected ERROR: StateFlags 00000600 DiscLBA 000001B8

MSP Reconstruction: EXCEPTION: Read ScratchPad Section 0000006E

MSP Reconstruction: EXCEPTION: Read MSP Segment Error
   Segment 006E StartLBA 00000DC0  ErrorLBA 00000DC0

   Error in MSP Header

   Continue MSP Read, PreError Segment Cnt0000

   Num Segments 006F

MSP MainPOR: 00001000  Tms 00019C92  0001FA3C  000397D6

MSP MainPOR: Complete

No HOST FIS-ReadyStatusFlags 0002A1A1

Internal SavePersistentInfo Triggered
ASCII Diag mode

F3 T>

最后能进 T

操作都正常,以下是硬盘的信息:
F3 1>/TJ

CAP:

  (P1=00) Validation Key: 00000020
  (P1=01) HDA Serial Number: W1E1BPQK
  (P1=02) PCBA Serial Number: 0000K3071AHD
  (P1=03) PCBA Part Number: Invalid
  (P1=04) Head Count: 04
  (P1=05) Node Name Validation Key: 01
  (P1=06) Node Name: 50 00 C5 00 53 9E AB 47
  (P1=07) Product Family ID: 58
  (P1=08) Product Family ID: 04
  (P1=09) PCBA Build Code: Invalid
  (P1=0A) ASIC Info:
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF 00
  (P1=0B) Firmware Key: FF FF FF FF FF FF FF FF FF FF FF FF FF FF
  (P1=0C) Firmware Key Checksum: FFFF
  (P1=0D) Date of Manufacture: 08252012
  (P1=0E) Destroked Buf Size Index: 03
  (P1=0F) Final Mfg Op: Invalid
  (P1=10) Final Mfg Erc: Undefined
  (P1=11) System Area Prep State: FE
  (P1=12) SPT Auto Run Delay: 00
  (P1=13) Reserved: 00
  (P1=14) Checksum: FFFF
  (P1=15) External Model Number: ST2000DM001-1CH164
  (P1=16) Internal Model Number: ST2000DM001-1CH164
  (P1=17) IDEMA Capacity: 00000000E8E088B0
  (P1=18) Reserved1:
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF
F3 T>

请教:
1:通电显示的哪些东西怎么清除,记得以前是通电直接到F3的.
2:上面那个好了之后硬盘还是有坏道,如何处理.
3:小白问题,假死这个盘坏道多了能吧他弄成个1.5t 用吗? 里面的数据不重要.
4:我用的是语心的F3修复.

cyd132 · 发表于 2016-12-2 00:44:27

其中另外一个的就卡这里不动了.

Boot 0x40M

Spin Up

Trans.

Spin Up

SpinOK
TCC:000C

(P) SATA Reset

为避免发帖过道,这个一样悬赏!

cyd132 · 发表于 2016-12-2 00:47:13

这是第3个了!
这个也卡着不动.

Boot 0x40M

Spin Up

Trans.

Spin Up

(P) SATA Reset

(P) SATA Reset

SIM Error 3005 LBA 0000000000097E40 FD FC373093
RW Error 00000080

MCMainPOR: Start:

User Data Base 0043E428

Check MCMT Version: Current

MC026: Reconstruction: MCMT Reconstruction Start

[RSRS] AAAA

LED:000000BD FAddr:00006220

不动之后ctrl+t 变为下面的信息
Rst 0x40M

LED:000000BD FAddr:00006220

LED:000000BD FAddr:00006220

之后又不动了!