日立ARM系列无法访问固件

hongfanshuju

日立ARM系列的盘进程序后不认盘不断电退出重进程序能识别到型号和固件版本序列号，但无法识别到容量，固件也无法访问,UDMA提示如下：该如何处理？
Selected family......................... : 7232A7
Model by ID............................. : HGST HTS725050A7E630                    

Techno mode key......................... : Error
ROM reading...
Possible Tech Key is found. Checking...
Result.................................. : Ok

Error startintg command: Reading SA [0x3F0000004, 0x4]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0000004, 0x1]
Device error detected (ABR)
Error reading module USAG(0): Error startintg command: Reading SA [0x3F0000004, 0x1]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0100004, 0x4]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0100004, 0x1]
Device error detected (ABR)
Error reading module USAG(1): Error startintg command: Reading SA [0x3F0100004, 0x1]
Device error detected (ABR)
Loading modules table................................................. : Error
Error :............................................................... : Module USAG: no copies read!
Loading the table of "open" modules................................... : Error
Error :............................................................... : Error executing loading "open" modules dir command
是否是NV损坏，但ARM系列的盘又没法做NV适配。怎么恢复数据，求助。。。。。。。。。。。。。

5d4g5df

是不是好用我在学不会

zhan857

来学习了。。。。。。。

conifore

好好好好好好好好好好好好

conifore

好好好好好好好好好好

闻永伟

是不是好用我在学不会

budi99

thanks for sharing