H-RAR Recovery v1.4 (压缩文档恢复修复工具支持碎片)

hco168 · 发表于 2012-6-12 20:11:14

H-RAR Recovery v1.4(企业版).rar (2.55 MB, 下载次数: 1669) 这个是企业版支持碎片支持修复扫描速度慢

H-RAR Recovery v1.4.rar (2.61 MB, 下载次数: 17) 这个是个人版不支持碎片修复扫描速度快

参考资料

RAR file format
RAR version 3.93 – Technical information
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

THE ARCHIVE FORMAT DESCRIBED BELOW IS ONLY VALID FOR VERSIONS SINCE 1.50

==========================================================================
RAR archive file format
==========================================================================

Archive file consists of variable length blocks. The order of these
blocks may vary, but the first block must be a marker block followed by
an archive header block.

Each block begins with the following fields:

HEAD_CRC    2 bytes    CRC of total block or block part
HEAD_TYPE    1 byte    Block type
HEAD_FLAGS    2 bytes    Block flags
HEAD_SIZE    2 bytes    Block size
ADD_SIZE    4 bytes    Optional field – added block size

Field ADD_SIZE present only if (HEAD_FLAGS & 0×8000) != 0

Total block size is HEAD_SIZE if (HEAD_FLAGS & 0×8000) == 0
and HEAD_SIZE+ADD_SIZE if the field ADD_SIZE is present – when
(HEAD_FLAGS & 0×8000) != 0.

In each block the followings bits in HEAD_FLAGS have the same meaning:

0×4000 – if set, older RAR versions will ignore the block
and remove it when the archive is updated.
if clear, the block is copied to the new archive
file when the archive is updated;

0×8000 – if set, ADD_SIZE field is present and the full block
size is HEAD_SIZE+ADD_SIZE.

Declared block types:

HEAD_TYPE=0×72       marker block
HEAD_TYPE=0×73       archive header
HEAD_TYPE=0×74       file header
HEAD_TYPE=0×75       old style comment header
HEAD_TYPE=0×76       old style authenticity information
HEAD_TYPE=0×77       old style subblock
HEAD_TYPE=0×78       old style recovery record
HEAD_TYPE=0×79       old style authenticity information
HEAD_TYPE=0x7a       subblock

Comment block is actually used only within other blocks and doesn’t
exist separately.

Archive processing is made in the following manner:

1. Read and check marker block
2. Read archive header
3. Read or skip HEAD_SIZE-sizeof(MAIN_HEAD) bytes
4. If end of archive encountered then terminate archive processing,
else read 7 bytes into fields HEAD_CRC, HEAD_TYPE, HEAD_FLAGS,
HEAD_SIZE.
5. Check HEAD_TYPE.
if HEAD_TYPE==0×74
read file header ( first 7 bytes already read )
read or skip HEAD_SIZE-sizeof(FILE_HEAD) bytes
if (HEAD_FLAGS & 0×100)
read or skip HIGH_PACK_SIZE*0×100000000+PACK_SIZE bytes
else
read or skip PACK_SIZE bytes
else
read corresponding HEAD_TYPE block:
read HEAD_SIZE-7 bytes
if (HEAD_FLAGS & 0×8000)
read ADD_SIZE bytes
6. go to 4.

==========================================================================
Block Formats
==========================================================================

Marker block ( MARK_HEAD )

HEAD_CRC       Always 0×6152
2 bytes

HEAD_TYPE    Header type: 0×72
1 byte

HEAD_FLAGS    Always 0x1a21
2 bytes

HEAD_SIZE    Block size = 0×0007
2 bytes

The marker block is actually considered as a fixed byte
sequence: 0×52 0×61 0×72 0×21 0x1a 0×07 0×00

Archive header ( MAIN_HEAD )

HEAD_CRC       CRC of fields HEAD_TYPE to RESERVED2
2 bytes

HEAD_TYPE    Header type: 0×73
1 byte

HEAD_FLAGS    Bit flags:
2 bytes
0×0001  – Volume attribute (archive volume)
0×0002  – Archive comment present
RAR 3.x uses the separate comment block
and does not set this flag.

0×0004  – Archive lock attribute
0×0008  – Solid attribute (solid archive)
0×0010  – New volume naming scheme (‘volname.partN.rar’)
0×0020  – Authenticity information present
RAR 3.x does not set this flag.

0×0040  – Recovery record present
0×0080  – Block headers are encrypted
0×0100  – First volume (set only by RAR 3.0 and later)

other bits in HEAD_FLAGS are reserved for
internal use

HEAD_SIZE    Archive header total size including archive comments
2 bytes

RESERVED1    Reserved
2 bytes

RESERVED2    Reserved
4 bytes

File header (File in archive)

HEAD_CRC       CRC of fields from HEAD_TYPE to FILEATTR
2 bytes       and file name

HEAD_TYPE    Header type: 0×74
1 byte

HEAD_FLAGS    Bit flags:
2 bytes
0×01 – file continued from previous volume
0×02 – file continued in next volume
0×04 – file encrypted with password

0×08 – file comment present
RAR 3.x uses the separate comment block
and does not set this flag.

0×10 – information from previous files is used (solid flag)
(for RAR 2.0 and later)

bits 7 6 5 (for RAR 2.0 and later)

0 0 0 – dictionary size 64 KB
0 0 1 – dictionary size  128 KB
0 1 0 – dictionary size  256 KB
0 1 1 – dictionary size  512 KB
1 0 0 – dictionary size 1024 KB
1 0 1 – dictionary size 2048 KB
1 1 0 – dictionary size 4096 KB
1 1 1 – file is directory

0×100 – HIGH_PACK_SIZE and HIGH_UNP_SIZE fields
are present. These fields are used to archive
only very large files (larger than 2Gb),
for smaller files these fields are absent.

0×200 – FILE_NAME contains both usual and encoded
Unicode name separated by zero. In this case
NAME_SIZE field is equal to the length
of usual name plus encoded Unicode name plus 1.

If this flag is present, but FILE_NAME does not
contain zero bytes, it means that file name
is encoded using UTF-8.

0×400 – the header contains additional 8 bytes
after the file name, which are required to
increase encryption security (so called ‘salt’).

0×800 – Version flag. It is an old file version,
a version number is appended to file name as ‘;n’.

0×1000 – Extended time field present.

0×8000 – this bit always is set, so the complete
block size is HEAD_SIZE + PACK_SIZE
(and plus HIGH_PACK_SIZE, if bit 0×100 is set)

HEAD_SIZE    File header full size including file name and comments
2 bytes

PACK_SIZE    Compressed file size
4 bytes

UNP_SIZE       Uncompressed file size
4 bytes

HOST_OS       Operating system used for archiving
1 byte                0 – MS DOS
1 – OS/2
2 – Win32
3 – Unix
4 – Mac OS
5 – BeOS

FILE_CRC       File CRC
4 bytes

FTIME          Date and time in standard MS DOS format
4 bytes

UNP_VER       RAR version needed to extract file
1 byte
Version number is encoded as
10 * Major version + minor version.

METHOD       Packing method
1 byte
0×30 – storing
0×31 – fastest compression
0×32 – fast compression
0×33 – normal compression
0×34 – good compression
0×35 – best compression

NAME_SIZE    File name size
2 bytes

ATTR          File attributes
4 bytes

HIGH_PACK_SIZE  High 4 bytes of 64 bit value of compressed file size.
4 bytes       Optional value, presents only if bit 0×100 in HEAD_FLAGS
is set.

HIGH_UNP_SIZE High 4 bytes of 64 bit value of uncompressed file size.
4 bytes       Optional value, presents only if bit 0×100 in HEAD_FLAGS
is set.

FILE_NAME    File name – string of NAME_SIZE bytes size

SALT          present if (HEAD_FLAGS & 0×400) != 0
8 bytes

EXT_TIME       present if (HEAD_FLAGS & 0×1000) != 0
variable size

other new fields may appear here.

==========================================================================
Application notes
==========================================================================

1. To process an SFX archive you need to skip the SFX module searching
for the marker block in the archive. There is no marker block sequence (0×52
0×61 0×72 0×21 0x1a 0×07 0×00) in the SFX module itself.

2. The CRC is calculated using the standard polynomial 0xEDB88320. In
case the size of the CRC is less than 4 bytes, only the low order bytes
are used.