碟片制造工艺流程

梭鱼 · 发表于 2012-5-30 21:26:41

HDD areal densities have been growing at compound annual growth rate of 60 -- 100% for many years. This trend does not seem to be abating with growing demand for conventional computers and new emerging markets such as consumer electronics. SHDS continues to advance its technology to keep pace with this burgeoning market.

STEP 1 - Substrates

3.5" aluminium or 2.5" glass substrates are processed.

STEP 2 - Texture

Substrates are polished to create texture patterns on the disk surface. Texturing is done for the purpose of removing substrate level defects. In addition inducing a specified level of roughness to prevent stiction between the head-disk interface. Finally it is done for aiding magnetic anisotropy in the sputtering process.

STEP 3 - Wash

All particulate contaminations must be removed and the disk surface must be perfectly cleaned and dry before entering the vacuum sputtering process.

STEP 4 - Sputter

Magnetic thin film layers are sputtered onto the disk surface Areal densities for media are primarily determined by this process. Substrates take on magnetic properties after various layers of magnetic alloys are sputtered onto them. A carbon layer finish is applied to make the media more robust and durable.

STEP 5 - Lubrication

A layer of solvent based lubricants are coated over the disk surface to enhance durability and media reliability performance.

STEP 6 - Tape Burnish

An abrasive tape is used to remove any asperities on the disk before testing.

STEP 7 - Testing

Disk is sent for mechanical and parametric testing.

STEP 8 - Packing

All disks that pass testing are then sealed in a vacuum package, ready for shipment to customers.

Disclaimer: Manufacturing flow may be modified depending on program requirements.

cert · 发表于 2012-5-30 22:30:18

[分享] 碟片制造工艺流程 [复制链接]


梭鱼梭鱼当前在线
注册时间2007-6-25最后登录2012-5-30在线时间253 小时阅读权限50积分961帖子630精华0UID96429  狗仔卡
23

主题 2

听众  961

积分

SAS硬盘

SAS硬盘, 积分 961, 距离下一级还需 39 积分该用户从未签到

收听TA 发消息电梯直达 1#
发表于 1 小时前 |只看该作者 |倒序浏览
记录付费主题, 价格: 2 金钱 HDD areal densities have been growing at compound annual growth rate of 60 -- 100% for many years. This trend does not seem to be abating with growing demand for conventional computers and new emerging markets such as consumer electronics. SHDS continues to advance its technology to keep pace with this burgeoning market.

STEP 1 - Substrates

3.5" aluminium or 2.5" glass substrates are processed.

STEP 2 - Texture

Substrates are polished to create texture patterns on the disk surface. Texturing is done for the purpose of removing substrate level defects. In addition inducing a specified level of roughness to prevent stiction between the head-disk interface. Finally it is done for aiding magnetic anisotropy in the sputtering process.

STEP 3 - Wash

All particulate contaminations must be removed and the disk surface must be perfectly cleaned and dry before entering the vacuum sputtering process.

STEP 4 - Sputter

Magnetic thin film layers are sputtered onto the disk surface Areal densities for media are primarily determined by this process. Substrates take on magnetic properties after various layers of magnetic alloys are sputtered onto them. A carbon layer finish is applied to make the media more robust and durable.

STEP 5 - Lubrication

A layer of solvent based lubricants are coated over the disk surface to enhance durability and media reliability performance.

STEP 6 - Tape Burnish

An abrasive tape is used to remove any asperities on the disk before testing.

STEP 7 - Testing

Disk is sent for mechanical and parametric testing.

STEP 8 - Packing

All disks that pass testing are then sealed in a vacuum package, ready for shipment to customers.

Disclaimer: Manufacturing flow may be modified depending on program requirements.

这就是卖的东西，别上当，看不懂的~~~对修盘没什么用~~~

梭鱼 · 发表于 2012-5-30 22:39:01

楼上的你就这点水准吗我说过对修盘有用嘛本来这些都是猎奇的东西增加知识面的你给我来一句对修盘没用那你本事好说点有用的吧行不你不看也就罢了这个论坛的宗旨是必须要对修盘有用才能发吗。何况我也事先打了预告的我辛苦找一阵子收2元的辛苦费不过分吧站着说话不腰疼看了就算是出去吹牛逼也多点谈资好不好！！！！真是XX吐不出象牙