希捷500G硬盘bios认到硬盘mhdd认不到硬盘 求思路

爱玲玲

希捷500G硬盘bios认到硬盘mhdd认不到硬盘 求思路
急求。谢谢各位提个醒。。
没有pc3000，求用终端指令方案。
具体的话那就再好不过了。有简单思路也要感谢你

matrixhdd

post you pic here

nitu023

接专修看看。

技星

通病修复[s:170]

技星

通病修复[s:170]

爱玲玲

post you pic here
matrixhdd 发表于 2011-12-7 21:58

                               
登录/注册后可看大图

   what's your meaning？
my harddisk can be identified in BIOS while it can not in MHDD(software)

爱玲玲

post you pic here
matrixhdd 发表于 2011-12-7 21:58

                               
登录/注册后可看大图

感觉跟你扯淡了，纯假洋鬼子

爱玲玲

接专修看看。
nitu023 发表于 2011-12-7 22:45

                               
登录/注册后可看大图

    小生连专修是什么都不知道，是不是 效率源？

烟台硬盘数据

Fixing zero capacity problem
1. Type the following: m0,2,2,0,0,0,0,22 and then press ENTER.2. At this point the drive will stop responding for a while.3. After some time (1—5 minutes) you will get several messages from the drive similar to these:

Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewrite Retries = 0000

User Partition Format Successful - Elapsed Time 0 mins 00 secs   

4. Wait some more time until you see the command prompt again:

F3 T>

5. Type the following: /2 and then press ENTER. You will see the following output:

F3 T>/2

F3 2>
6. Type capital Z and press ENTER:

F3 2>Z

Spin Down Complete
Elapsed Time 10.543 secs
F3 2>
7. At this point you have to re-power the drive. The procedure is complete.

zhouliyong12

BOIS里能识别硬盘，MHDD找不到，你把硬盘线换一个口子就行了。