pc3k mx_pkr ver1.20 的中文菜单——送给初学的朋友

zyuhua · 发表于 2006-8-15 18:15:44

pc3k mx_pkr ver1.20 的中文菜单
1:Logicaln scanning
  逻辑扫描
1.1|------------------------------------------ |
| initial LBA position:x       |
| 开始位置                |
| final LBA position:xxxxxxxx    |
|    结束位置                |
| reversive scanning:on          |
| 反向扫描打开关闭 |
| number of passes:3          |
| 通过的次数                |
| perform writing test:on       |
| 执行写测试打开关闭          |
| verif. instead of reading       |
| 读版本代替                |
| put defects to:p-list          |
| 放置默认列表             |
|                         |
|------------------------------------------|
2:disc firmware zone
  固件地区
  2.1 work with momeory buffer
操作存储缓冲器
2.1.1 memory buffer reading
      存储缓冲器读
2.1.2 memory buffer writing
      存储缓冲器写
  2.2 work with sa
操作sa
2.2.1 checking of disc fw structure
   检查盘片固件结构
2.2.2 sa surface checking
   sa表面检查
2.2.3 reading of the modules
   读那个模块
2.2.4 writing of modules
   写那个模块
2.2.5 reading modules groups
   读全部模块
2.2.6 writing modules groups
   写全部模块
2.2.7 sa write test
   sa写测试
2.2.8 modules repairing
   模块修理
2.2.9 transltor regeneration
   扇区再生
2.2.10 spindle stop
      主轴停转
  2.3 LDR-file loading
加载ldr文件
  2.4 LDR-file creation
制造ldr文件
  2.5 security subsystem
安全系统
3: disc id
  盘片id号
4: defects table
  缺陷表
  4.1 view p-list
   查看p-list
  4.2 view g-list
   查看g-list
  4.3 move g-list defects to p-list
   转移g表到p表
  4.4 erase g-list
   擦除g-list
  4.5 erase g-list and p-list
   擦除g-list和p-list
  4.6 import from defectoscope
   引入探测器
5: selfscan
  自检
  5.1 start selfscan
   开始自检测试
  5.2 stop selfscan
   暂停自检测试
  5.3 view selfscan state
   查看自检测试状态
6: exit
  退出