7200.7酷鱼做SF造成的问题

[复制链接]

该用户从未签到

9

主题

15

回帖

145

积分

[INTOHARD]班长

Rank: 2

积分
145
发表于 2006-6-26 08:46:56 | 显示全部楼层 |阅读模式
一个希捷40G/7200.7,挂到WINDOWS做从盘或光盘启动进DOS,可以认盘,数据也可以正常读取保存。
执行format c:/s命令,也可以正常完成,但是重起却不能从该硬盘引导进入DOS,提示boot failure
用软盘版MHDD,发现不认盘,并提示:SLAVE DEVICES NOT SUPPORTED

于是用N1,1,22指令,激活SF,超级终端运行了大概100分钟后,COM会话框中出现如下文字:

<empty>
drive must be reformatted
Skipping MDW oversample s/n cylinders.

然后就不动了,停了15分钟以后,又开始跑了,显示:

ASCII logging on
EP=0, TA=0, HiGain=0, OTRd=0, Early Rd=0, Splash=0, Reload=0, NPML=0, MRBias=0
Bst/Zap=0, SrvoThrsh=0, RunOut=0, MaxECC=0, ECC 2=0, ECC 1=0, ECC 0=0
Data=00, Write=01, ID=FF

。。。。。。

OkEnd Test 6F
Begin Test 4E
ASCII logging on
ASCII logging off    Not Power Cycling
ASCII logging on
Log 02 - Health 0000 - HlthDtl 0000 - Time = 00:21:49 Log Type = 01
Log 23 - Health 0000 - HlthDtl 0000 - Time = 00:17:00 Log Type = 01
Log 03 - Health 0000 - HlthDtl 0000 - Time = 00:01:09 Log Type = 01
Log 73 - Health 0000 - HlthDtl 0000 - Time = 00:00:39 Log Type = 01
Log 04 - Health 0000 - HlthDtl 0000 - Time = 00:00:48 Log Type = 01
Log 05 - Health 0000 - HlthDtl 0000 - Time = 00:00:12 Log Type = 01
Log 06 - Health 0000 - HlthDtl 0000 - Time = 00:00:02 Log Type = 01
Log 07 - Health 0000 - HlthDtl 0000 - Time = 00:00:03 Log Type = 01
Log 0F - Health 0000 - HlthDtl 0000 - Time = 00:04:59 Log Type = 01
Log 10 - Health 0000 - HlthDtl 0000 - Time = 00:02:10 Log Type = 01
Log 11 - Health 0000 - HlthDtl 0000 - Time = 00:01:38 Log Type = 01
Log 12 - Health 0000 - HlthDtl 0000 - Time = 00:02:02 Log Type = 01
Log 13 - Health 0000 - HlthDtl 0000 - Time = 00:01:37 Log Type = 01
Log 14 - Health 0000 - HlthDtl 0000 - Time = 00:01:36 Log Type = 01
Log 15 - Health 0000 - HlthDtl 0000 - Time = 00:01:41 Log Type = 01
Log 16 - Health 0000 - HlthDtl 0000 - Time = 00:01:40 Log Type = 01
Log 17 - Health 0000 - HlthDtl 0000 - Time = 00:01:42 Log Type = 01
Log 18 - Health 0000 - HlthDtl 0000 - Time = 00:02:05 Log Type = 01
Log 19 - Health 0000 - HlthDtl 0000 - Time = 00:01:39 Log Type = 01
Log 1A - Health 0000 - HlthDtl 0000 - Time = 00:01:43 Log Type = 01
Log 1B - Health 0000 - HlthDtl 0000 - Time = 00:01:38 Log Type = 01
Log 1C - Health 0000 - HlthDtl 0000 - Time = 00:02:03 Log Type = 01
Log 1D - Health 0000 - HlthDtl 0000 - Time = 00:01:38 Log Type = 01
Log 1E - Health 0000 - HlthDtl 0000 - Time = 00:01:36 Log Type = 01
Log 2A - Health 0000 - HlthDtl 0000 - Time = 00:01:36 Log Type = 01
Log 1F - Health 0000 - HlthDtl 0000 - Time = 00:00:05 Log Type = 01
Log 2F - Health 0000 - HlthDtl 0000 - Time = 00:00:04 Log Type = 01
Log 0B - Health 0000 - HlthDtl 0000 - Time = 00:00:10 Log Type = 01
Log 09 - Health 0000 - HlthDtl 0000 - Time = 00:02:30 Log Type = 01
Log 58 - Health 0000 - HlthDtl 0000 - Time = 00:02:55 Log Type = 01
Log 08 - Health 0000 - HlthDtl 0000 - Time = 02:10:32 Log Type = 02
Log 0A - Health 0000 - HlthDtl 0000 - Time = 00:01:23 Log Type = 01
Log 72 - Health 0000 - HlthDtl 0000 - Time = 00:02:36 Log Type = 01
Log 0C - Health 0000 - HlthDtl 0000 - Time = 00:18:59 Log Type = 02
Log 0E - Health 0000 - HlthDtl 0000 - Time = 00:00:10 Log Type = 02
Log 0D - Health 0000 - HlthDtl 0000 - Time = 00:00:08 Log Type = 01
Log 40 - Health 0000 - HlthDtl 0000 - Time = 00:27:07 Log Type = 01
Log 31 - Health 0000 - HlthDtl 0000 - Time = 00:15:31 Log Type = 04
Log 32 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 04
Log 33 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 04
Log 34 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 04
Log 36 - Health 0000 - HlthDtl 0000 - Time = 00:00:31 Log Type = 02
Log 37 - Health 0000 - HlthDtl 0000 - Time = 00:00:02 Log Type = 02
Log 26 - Health 0000 - HlthDtl 0000 - Time = 00:05:38 Log Type = 01
Log 3A - Health 0000 - HlthDtl 0000 - Time = 00:44:36 Log Type = 02
Log 38 - Health 0000 - HlthDtl 0000 - Time = 00:00:04 Log Type = 02
Log 68 - Health 0000 - HlthDtl 0000 - Time = 00:00:17 Log Type = 02
Log 69 - Health 0000 - HlthDtl 0000 - Time = 00:00:14 Log Type = 02
Log 3B - Health 0000 - HlthDtl 0000 - Time = 00:00:19 Log Type = 02
Log 3C - Health 0000 - HlthDtl 0000 - Time = 00:00:16 Log Type = 02
Log 3D - Health 0000 - HlthDtl 0000 - Time = 00:00:03 Log Type = 01
Log 3E - Health 0000 - HlthDtl 0000 - Time = 00:00:04 Log Type = 01
Log 3F - Health 0000 - HlthDtl 0000 - Time = 00:01:01 Log Type = 01
Log 43 - Health 0000 - HlthDtl 0000 - Time = 00:06:25 Log Type = 01
Log 20 - Health 0000 - HlthDtl 0000 - Time = 00:13:05 Log Type = 01
Log 47 - Health 0000 - HlthDtl 0000 - Time = 00:34:03 Log Type = 01
Log 4B - Health 0000 - HlthDtl 0000 - Time = 00:00:25 Log Type = 01
Log 48 - Health 0000 - HlthDtl 0000 - Time = 00:16:49 Log Type = 01
Log 41 - Health 0000 - HlthDtl 0000 - Time = 00:01:12 Log Type = 01
Log 27 - Health 0000 - HlthDtl 0000 - Time = 00:04:34 Log Type = 01
Log 49 - Health 0000 - HlthDtl 0000 - Time = 00:14:50 Log Type = 01
Log 4A - Health 0000 - HlthDtl 0000 - Time = 00:00:03 Log Type = 01
Log 4D - Health 0000 - HlthDtl 0000 - Time = 00:00:21 Log Type = 01
Log 39 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 01
Log 22 - Health 0000 - HlthDtl 0000 - Time = 00:00:19 Log Type = 01
Log 61 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 02
Log 28 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 01
Log 62 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 02
Log 29 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 01
Log 63 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 02
Log 59 - Health 0000 - HlthDtl 0000 - Time = 00:00:01 Log Type = 01
Log 56 - Health 0000 - HlthDtl 0000 - Time = 00:09:29 Log Type = 01
Log 6F - Health 0000 - HlthDtl 0000 - Time = 00:00:38 Log Type = 01
Total Cert Time = 07:12:23
ASCII logging off
OkEnd Test 50         Power Cycling

T>

然后N50结束,接着按CTRL+T出现下面文字:

T>Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk   M-21  11-25-03 18:53

Buzz  - Head Mask FFFF - Switch to full int.
          Spin Ready
8.01  09-28-04 15:05
(P)PATA Reset
OVERLAY FAILED
          T>

再挂到WINDOWS做从盘或光盘启动进DOS,都不认盘了!!

存在的问题:首先,第一步没做固件备份,不应该。第二,出现“OVERLAY FAILED”错误,不知道是什么意思?第三,自己毛判是固件丢失的缘故,但是由于没做备份,就算找到类同的固件,不知道如何从COM写回?

特请教各位前辈!!

该用户从未签到

9

主题

15

回帖

145

积分

[INTOHARD]班长

Rank: 2

积分
145
 楼主| 发表于 2006-6-26 18:54:17 | 显示全部楼层
怎么都没一个回帖的?
难道都不懂?估计不可能,那剩下的原因。。。。。。
  • TA的每日心情
    开心
    2023-12-15 09:13
  • 签到天数: 55 天

    [LV.5]六品通判

    1197

    主题

    1965

    回帖

    13万

    积分

    Administrator

    分子与原子计算公式

    Rank: 9Rank: 9Rank: 9

    积分
    132061

    终身成就奖优秀斑竹奖宣传大使奖特殊贡献奖

    QQ
    发表于 2006-6-26 23:14:22 | 显示全部楼层
    这个方法就可以解决你的问题,希望不要无视斑竹的劳动!
    http://bbs.intohard.com/viewthread.php?tid=6625
    有些问题在论坛都可以找到答案的!
    以后仔细看,多学习多研究!
    以后题目不要让人误解,不然都不会帮助你的,我已经给你修改了!

    该用户从未签到

    9

    主题

    15

    回帖

    145

    积分

    [INTOHARD]班长

    Rank: 2

    积分
    145
     楼主| 发表于 2006-6-26 23:54:16 | 显示全部楼层
    多谢老大教诲,学生我一定刻苦钻研,学不成誓不休!

    看过了老大推荐的帖子,又长了些见识。

    遗憾的是,苦于没有PCI-PC3000,也只能望洋兴叹了。

    也正是由于初学,还在犹豫该买些什么样的付费软件工具,所以才选择先从COM指令开始学,而且本人也对指令很感兴趣,可惜现成的公开的能独立维修ST的太少了。

    该用户从未签到

    2

    主题

    30

    回帖

    -5

    积分

    [INTOHARD]地雷

    积分
    -5
    发表于 2007-3-18 17:23:51 | 显示全部楼层
    用春华回写ATA就行了.

    该用户从未签到

    2

    主题

    30

    回帖

    -5

    积分

    [INTOHARD]地雷

    积分
    -5
    发表于 2007-3-18 17:24:16 | 显示全部楼层
    我这有好用的春华.要就加646069485
    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

    快速回复 返回顶部 返回列表