人民币 50元求助

ufo_airen · 发表于 2009-7-21 00:11:11

2块ST .7 120G的盘坏道在加LDR以后跑F级输入N2 跑了 20秒之后就停了提示如下
Begin Test 02
ASCII logging on

                  Not Power Cycling

                  Not Power Cycling
Zone 00 Head 00 adaptives set to defaults
Zone 00 Head 01 adaptives set to defaults
Zone 00 Head 02 adaptives set to defaults
Zone 01 Head 00 adaptives set to defaults
Zone 01 Head 01 adaptives set to defaults
Zone 01 Head 02 adaptives set to defaults
Zone 02 Head 00 adaptives set to defaults
Zone 02 Head 01 adaptives set to defaults
Zone 02 Head 02 adaptives set to defaults
Zone 03 Head 00 adaptives set to defaults
Zone 03 Head 01 adaptives set to defaults
Zone 03 Head 02 adaptives set to defaults
Zone 04 Head 00 adaptives set to defaults
Zone 04 Head 01 adaptives set to defaults
Zone 04 Head 02 adaptives set to defaults
Zone 05 Head 00 adaptives set to defaults
Zone 05 Head 01 adaptives set to defaults
Zone 05 Head 02 adaptives set to defaults
Zone 06 Head 00 adaptives set to defaults
Zone 06 Head 01 adaptives set to defaults
Zone 06 Head 02 adaptives set to defaults
Zone 07 Head 00 adaptives set to defaults
Zone 07 Head 01 adaptives set to defaults
Zone 07 Head 02 adaptives set to defaults
Zone 08 Head 00 adaptives set to defaults
Zone 08 Head 01 adaptives set to defaults
Zone 08 Head 02 adaptives set to defaults
Zone 09 Head 00 adaptives set to defaults
Zone 09 Head 01 adaptives set to defaults
Zone 09 Head 02 adaptives set to defaults
Zone 0A Head 00 adaptives set to defaults
Zone 0A Head 01 adaptives set to defaults
Zone 0A Head 02 adaptives set to defaults
Zone 0B Head 00 adaptives set to defaults
Zone 0B Head 01 adaptives set to defaults
Zone 0B Head 02 adaptives set to defaults
Zone 0C Head 00 adaptives set to defaults
Zone 0C Head 01 adaptives set to defaults
Zone 0C Head 02 adaptives set to defaults
Zone 0D Head 00 adaptives set to defaults
Zone 0D Head 01 adaptives set to defaults
Zone 0D Head 02 adaptives set to defaults
Zone 0E Head 00 adaptives set to defaults
Zone 0E Head 01 adaptives set to defaults
Zone 0E Head 02 adaptives set to defaults
Zone 0F Head 00 adaptives set to defaults
Zone 0F Head 01 adaptives set to defaults
Zone 0F Head 02 adaptives set to defaults
Head Mask 0000 -
Read Bias - Head    0 1 2 3
                  A A A

HiTemp Bias Head    0 1 2 3
                  A A A
Head Mask 0000 - Switch to full int.
$Head Mask 0000 - Switch to full int.
            Spin Ready
Ref Trk Tan Timing Skew (h0 to h0) = 0000 servo clocks.
ID-OD Delta Timing Skew (h0 to h0) = 0000 servo clocks.
Ref Trk Tan Timing Skew (h0 to h1) = 0096 servo clocks.
ID-OD Delta Timing Skew (h0 to h1) = 07E4 servo clocks.
Ref Trk Tan Timing Skew (h0 to h2) = 0085 servo clocks.
ID-OD Delta Timing Skew (h0 to h2) = F8AB servo clocks.
Ref Trk Tan Timing Skew (h0 to h3) = 0000 servo clocks.
ID-OD Delta Timing Skew (h0 to h3) = 0000 servo clocks.
Calibrating Physical Track 0 on heads 0 thru 2
Calibrating Head 0 ...
GC Seek Error 2 !!!
$Switch to full int.
$Switch to full int.
$Switch to full int.
$Head Mask 0000 - Switch to full int.
$Head Mask 0000 - Switch to full int.
            Spin Ready
$Switch to full int.
            AM Reacquired
!!! Adaptives corrupt !!!
AbEnd Test 02
T>

一共2块都是这个问题坏道的盘不是很多大概400多个色块  不能跑校准在正常T下和F级都提示这个东西请高手帮助解决一下人民币50酬谢钱不多一个心意而已有哥们会的请加我QQ:282875079 早9点到晚23点  在线等非常的感谢！！！！！！！！！！

ufo_airen · 发表于 2009-7-21 00:14:06

自己顶一下希望有热心肠的朋友帮助我

大路头仔 · 发表于 2009-7-21 00:27:26

应该是有一个磁头有问题吧。试一下输入一个80G的SN再跑。抛泥引金。呵呵.....

zhangaoeizz · 发表于 2009-7-21 00:56:30

GC2错误... 8级下C20搞定 .50块拿来.哈哈.

硬盘菜鸟2008 · 发表于 2009-7-21 07:26:42

2块ST .7 120G的盘坏道在加LDR以后跑F级输入N2 跑了 20秒之后就停了提示如下
Begin Test 02
ASCII logging on

                  Not Power Cycling

                  Not Power Cycling
...
ufo_airen 发表于 2009-7-21 00:11

登录/注册后可看大图

GC2 ERROR 2,你用STR的GC2错误修复就好了啊