Partition Boot Sector

甜橙 · 发表于 2007-11-3 16:11:13

Table 5-1 describes the boot sector of a volume formatted with NTFS. When you format an NTFS volume, the format program allocates the first 16 sectors for the boot sector and the bootstrap code.
Table 5-1 NTFS Boot Sector

Byte Offset	Field Length	Field Name
0x00	3 bytes	Jump Instruction
0x03	LONGLONG	OEM ID
0x0B	25 bytes	BPB
0x24	48 bytes	Extended BPB
0x54	426 bytes	Bootstrap Code
0x01FE	WORD	End of Sector Marker

On NTFS volumes, the data fields that follow the BPB form an extended BPB. The data in these fields enables Ntldr (NT loader program) to find the master file table (MFT) during startup. On NTFS volumes, the MFT is not located in a predefined sector, as on [wiki]FAT[/wiki]16 and FAT32 volumes. For this reason, the MFT can be moved if there is a bad sector in its normal location. However, if the data is corrupted, the MFT cannot be located, and Windows NT/2000 assumes that the volume has not been formatted.
The following example illustrates the boot sector of an NTFS volume formatted while running Windows 2000. The printout is formatted in three sections:

Bytes 0x00- 0x0A are the jump instruction and the OEM ID (shown in bold print).
Bytes 0x0B-0x53 are the BPB and the extended BPB.
The remaining code is the bootstrap code and the end of sector marker (shown in bold print).

The following table describes the fields in the BPB and the extended BPB on NTFS volumes. The fields starting at 0x0B, 0x0D, 0x15, 0x18, 0x1A, and 0x1C match those on FAT16 and FAT32 volumes. The sample values correspond to the data in this example.

Byte Offset	Field Length	Sample Value	Field Name
0x0B	WORD	0x0002	Bytes Per Sector
0x0D	BYTE	0x08	Sectors Per Cluster
0x0E	WORD	0x0000	Reserved Sectors
0x10	3 BYTES	0x000000	always 0
0x13	WORD	0x0000	not used by NTFS
0x15	BYTE	0xF8	Media Descriptor
0x16	WORD	0x0000	always 0
0x18	WORD	0x3F00	Sectors Per Track
0x1A	WORD	0xFF00	Number Of Heads
0x1C	DWORD	0x3F000000	Hidden Sectors
0x20	DWORD	0x00000000	not used by NTFS
0x24	DWORD	0x80008000	not used by NTFS
0x28	LONGLONG	0x4AF57F0000000000	Total Sectors
0x30	LONGLONG	0x0400000000000000	Logical Cluster Number for the file $MFT
0x38	LONGLONG	0x54FF070000000000	Logical Cluster Number for the file $MFTMirr
0x40	DWORD	0xF6000000	Clusters Per File Record Segment
0x44	DWORD	0x01000000	Clusters Per Index Block
0x48	LONGLONG	0x14A51B74C91B741C	Volume Serial Number
0x50	DWORD	0x00000000	Checksum

Protecting the Boot SectorBecause a normally functioning system relies on the boot sector to access a volume, it is highly recommended that you run disk scanning tools such as Chkdsk regularly, as well as back up all of your data files to protect against data loss if you lose access to a volume.

[ 本帖最后由甜橙于 2007-11-3 16:13 编辑 ]

na509 · 发表于 2008-3-26 12:39:29

OH,Good article!thank you!

longwind2000 · 发表于 2009-2-19 15:09:37

look 不明白啊