朋友们帮看看

usaeep · 发表于 2007-10-13 12:22:11

Interface task reset
1024k x 16 buffer detected
SNOWMASS - 1_Disk 3.19  11-20-01 12:12

                        Power Cycling
ATReset

Ref 00EC - Head Mask 000F - Switch to full int.
            Spin Ready
AutoRd Err 47 at 700c.00.0004
AutoRd Err 47 at 700c.00.0002
AutoRd Err 47 at 700c.00.0002
AutoRd Err 47 at 700c.00.0092
AutoRd Err 47 at 700c.00.0002
AutoRd Err 47 at 700c.00.0002
AutoRd Err 47 at 700c.00.0002

Sweeping 189 Cyls
AutoRd Err 47 at 700c.00.0004
PMaster with Non-conforming Slave

csdn · 发表于 2007-10-13 12:25:45

原帖由 usaeep 于 2007-10-13 12:22 发表

 登录/注册后可看大图

Sweeping 189 Cyls
AutoRd Err 47 at 700c.00.0004

错误很明确，不过希捷err47有时候硬件/磁头问题也会这样，可以进入T级模式吗？如果可以，首先尝试备份ATA或者VEN,然后直接开始进行自校准。

usaeep · 发表于 2007-10-13 13:37:35

从第二步开自己校准ead Linearizing
Cyl = 6ECB
Head = 00 Gain Adjust = 00F7
Head = 01 Gain Adjust = 0110
Head Linearizing
Cyl = 001F
Head = 00 Gain Adjust = 00FA
Head = 01 Gain Adjust = 0114
Head Linearizing
Cyl = DD78
Head = 00 Gain Adjust = 00DE
Head = 01 Gain Adjust = 00FE
Table Linearization in Process
Head Gain Measure
Head Max  -38h  -28h  -18h  -08h  +08h  +18h  +28h  +38h
00  69B8  5D18  5A7B  5AE1  5E3E  63B7  69B8  67C4  6195
01  6086  58E7  5E2B  6086  5BFE  59E6  5C78  5C96  5AB3
Normalized Integrated Gain
Head  -40h  -30h  -20h  -10h 00 +10h  +20h  +30h  +40h
00  0000  0385  06F1  0A61  0DF1  11B6  15B5  19A2  1D53
01  0000  03AF  0795  0B94  0F63  131C  16F0  1AC6  1E88
PES to Position Table
Head  -40h  -30h  -20h  -10h 00 +10h  +20h  +30h  +40h
00  FFC0  FFCF  FFDE  FFED  FFFD  000D  001F  0030  0040
01  FFC0  FFCF  FFE0  FFF1  0001  0010  0020  0030  0040
EP=0, TA=0, HiGain=0, OTRd=0, Early Rd=0, Splash=0, Reload=0, VCO=0, MRBias=0
Bst/Zap=0, SrvoThrsh=0, RunOut=0, MaxECC=0, ECC 2=0, ECC 1=0, ECC 0=1
Data=05, Write=40, ID=1E    到这里就停了