["S.M.A.R.T. Status BAD,Backup and Replace"是什么错?

foker · 发表于 2005-5-3 23:57:34

我的电脑前天关机还好好的，昨天开机就进不去了，在COMS中能看见硬盘（MAXTOR 80G的Maxtor 6Y08L0），挂在别的好的机器上，开机在显示硬件检测时很慢，但能通过，会报“Pri Slave Hard Disk:S.M.A.R.T. Status BAD,Backup and Replace，进winxp也很慢，就是一直显示那个微软的窗口图表，下面的进度条不停的走，过很长时间（5分钟）才能进去，进去后不能见到这个坏盘的任何一个分区，但在设备管理器中能看见这个硬盘型号Maxtor 6Y08L0。这个硬盘分C，D，E，F，G5个分区，前面4个15G，最后一个20G，D，E，F，G上都有很多文件不想失去，各位老大该怎么办啊！下了个Easyrecover但不知道怎么用（不敢乱用），不知道还能找回分区吗？ 
能用pc3000修吗？看见pc3000里面好象有个什么SMART维修的。pc3000可以直接在dos下用吗？不会一定要那张pci的维修卡吧？ 
 
下面是用Easyrecover检测后的结果: 
Running Full Diagnostic Test... 
Testing drive Maxtor 6Y080L0... 
I/O Error on sector 0. 
I/O Error on sector 1. 
I/O Error on sector 2. 
I/O Error on sector 4. 
I/O Error on sector 5. 
I/O Error on sector 32. 
I/O Error on sector 33. 
I/O Error on sector 63. 
I/O Error on sector 96. 
I/O Error on sector 98. 
I/O Error on sector 107. 
I/O Error on sector 109. 
I/O Error on sector 110. 
I/O Error on sector 135. 
I/O Error on sector 136. 
I/O Error on sector 158. 
I/O Error on sector 159. 
I/O Error on sector 169. 
I/O Error on sector 229. 
I/O Error on sector 230. 
Error count exceeded! 
 
 
 
Test Results: 
Model: Maxtor 6Y080L0 
Capacity: 76.33 GB 
Full Diagnostic Test: Failed! 
 
 
 
Recommendations: 
Full Diagnostic Test for drive Maxtor 6Y080L0 failed, physical drive problems have been found indicating your hard drive is physically unstable. If you ARE experiencing a data loss situation, contact Technical Support or Data Recovery Services at 1-800-872-2599. Continuing to operate your system may damage your hard drive beyond repair or cause irretrievable data loss. If you ARE NOT in a data loss situation, it is recommended you contact the drive manufacturer for a replacement drive.

[本贴已被作者于 2005年05月05日 11时57分06秒编辑过][/ALIGN]