ST500DM002 KC43 问题

蕻葳 · 发表于 2014-9-6 15:14:10

Boot 0x10M
Spin Up[0x00000000][0x0000B67C][0x0000BA10]
Trans.
Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset
  MediaPartition:
                     Host LBA  Length Disc LBA  Length Start Cyl  Head
   Media Partition  00000000  00997B98  00000000  00132F73  00000000  00000000
            MC    00000000  00989C80  00000000  00131390  00000000  00000000
            MSP    00990C10  00000B20  00132182  00000164  0000076B  00000000
      User Partition  00997B98          00132F73          00000761  00000000
MCMainPOR: EXCEPTION: SIM aborted prior to MCMT read
MCMainPOR: EXCEPTION: POR Failed General
MCMainPOR: Feature Disabled...
MSP MainPOR:
MSP Init Metadata
   Buf Bytes/VBM 00000208  DBA Base 06000000
   Metadata size in bytes 0040
   Num Segments 0059
   Logical Sector Alignment 00000000
MSP Reconstruction
MSP Read ScratchPad Section 0000  DiscLBA 00132182  BlkSize 00000B20  Num Segments 00000059  DiscLba 00132182
   No valid segments found
MSP MSP Main Store Verify  Reconstruction Status 10003000
   Reconstruction Status 00003000
MSP Init ScratchPad on DiscDiscLBA 00132182  DiSCSIze 00000164  PhyBlkLBA 00990C10  BlkSize 00000B20
   Write MSP Segment PhyBlkLBA 00990C10  BlkSize 00000B20  DiscLba 00132182  RW_RTL FFFFFFFF
MSP MainPOR: Complete
MSP MainPOR: Feature Enabled...
   ScratchPad restore NOT required
ASCII Diag mode
F3 T >
                              问题刚开始能认盘  坏道红绿多  按照平时修坏道的流程格了一遍断电  重启后不认盘也进不了T
  经过多番努力可以进T 可是怎么弄都不再认盘  出现上面故障
                     修通病清SM 重建恢复  都没用  效果依旧
                                 看看有没有高手遇到过此故障帮忙解答下
                                             谢谢