实用数据备份软件说明帮助

资深乐迷 · 发表于 2012-12-19 11:52:42

中文名: 磁盘映像软件
英文名: Drive SnapShot
资源格式: 压缩包
版本: v1.42.16470
发行时间: 2012年
制作发行: Tom Ehlert Software
语言: 英文
软件类型：系统工具 - 硬件工具
软件性质：免费破解软件
操作系统：Windows
应用平台：Windows NT 4.0 Service pack 3, 2000, XP, 2003 Server, Vista, 2008, 7, 2008 R2, PE, Windows-X64

Drive SnapShot 是一款磁盘映像软件，用户可以方便安全的备份、恢复数据和察看硬盘数据。使用了WindowsNT驱动器技术，支持Windows NT/2000/XP/2003/PE平台,SnapShot为带来了两项新的磁盘映像功能：
1.Snapshot Backup ——在windows运行时建立磁盘镜像；
2.Snapshot View——以友好的方式浏览保存的磁盘镜像
英文介绍：
“Drive Snapshot” is disk imaging software that enables the user to back up, restore and view backed up hard disk data, easily and safely.
Using WindowsNT driver technology, Snapshot brings two new features to disk imaging:

1. Snapshot Backup – create disk images while Windows is running
This allows the user to work in his usual environment when backing up his data.
Any device suitable for file storage can be used for the image destination, like your local drive, a network drive or any removable drive

And – most important – the image will be an industrial quality image, even though WinNT constantly writes to the disk. The user may continue to work normally, while a backup operation is in progress; the image will still be valid and consistent.
This enables one of the most important things in backup business: backup often

It is even possible to make an image backup for servers, that must be online 24 hours a day.
Snapshot Backup – Main use
Snapshot Backup is aimed at the backup/disaster recovery market. There is little use for on the fly disk image creation, if you want to deploy hundreds or thousands of workstations. We think however, that the possibility to do on the fly backup is very important for the end user to regularly protect his data. At least, this was our reason to create Snapshot. No need to shut down and boot from floppy, no need to create network disks, and no need to wait half an hour for the backup process – we think that’s nice.
2. Snapshot View – Explore saved disk images the friendly way
The image file is presented to the user as a virtual drive. This virtual drive can be used like any other drive, using any Windows program, be it Explorer, Norton Commander, or your favourite MP3 Player.

key features of “Drive Snapshot”:

· Create Disk Image Backups, while running Windows
· There is no restart (to DOS) necessary. Never.
· Continue your work, while the Backup is in progress
· The new Snapshot technology ensures, that all data are consistent, and reflect the PC’s data at the start of backup. There are no difficulties with opened files. Never.
· This enables a very fast and easy way to backup servers and other computers, that must run 24 hours a day.
· Easy Use and Restore of single Files or directories
· Drive Snapshot creates a virtual drive, containing all your drives data. You may use, compare, or restore these files directly from the Disk Image file.
· This works with any program of your choice, including (of course) the Windows Explorer
· Complete Restore of a disk in case of Disaster
· If a disk is restored to it’s original state, it will be exactly the same as at the time of Backup – byte for byte.
· Restoring a system partition will require DOS; other drives can be restored using Windows
· Compatible to all Windows file systems (FAT16, FAT32, NTFS)
· Compatible to all Windows RAID Methods
· Very easy and comprehensive command line interface
· This makes automation of regular tasks a breeze.

System requirements:

Windows NT 4.0 Service pack 3, 2000, XP, 2003 Server, Vista, 2008, 7, 2008 R2, PE, Windows-X64
2 MB disk space + space to save the disk images.
8MB RAM if active, 0 MB if not active.
You need administrative rights to execute Drive Snapshot

软件界面翻译：（个人提供，有错指正）
[backup a volume]
[备份卷]
  Snapshot C: X:\C-DRIVE.sna
      -A - save ALL sectors, ignore free cluster info (maintenance)
      -A - 保存所有扇区，忽略剩余簇信息（维护）
      -L650 - Limit resulting imagesize to 650MB (CDROM size)
      -L650 - 限制映像大小为650MB (CDROM 大小)
      -T - Test generated image file (verify correct checksums)
      -T - 测试生成的映像文件（验证正确的校验）
      -W - suppress <Hit any key> if started from scheduler
      -W - 按下 <按任意键> 如果以计划任务启动
      -R - Empty Recycle Bin for this drive before Backup
      -R - 备份前清空驱动器的回收站
      -G - Graphical status display for command line mode
      -G - 命令行模式下图形显示
      -PW=MyPassword (also used for restore and viewing)
      -PW=密码 (也用于恢复和查看)
      -C="My comment" add a comment to the image
      -C="注释" 添加注释到映像
      -o[path][filename]  generate hash file with name "path\filename"
      -o[path][filename]  产生名称为 "path\filename" 的哈希文件
      -o - don't generate hash file
      -o - 不产生哈希文件
      -h<HashFile> make a differential image
      -h<HashFile> 创建差分映像
[backup multiple volumes and drives without drive letters]
[备份多卷和无盘符驱动器]
  Snapshot C:+D:+HD1:3 X:\$disk-DRIVE.sna
      HD1:3 is the third partition on the first disk
      HD1:3 是第一磁盘第三分区
      HD1:* can be used to backup all partitions on the first disk
      HD1:* 可用于备份第一磁盘全部分区
Options for command line substitutions
命令行下可替换选项
Possible values for substitution are:
替换的可用值:
      $disk  is substituted with the drive letter
      $disk  用驱动器盘符替换
      $date  results in 050131 which represents January 31 2005
      $date  用 050131 替换 January 31 2005
      $computername  is substituted with the computername
      $computername  用电脑名称替换
      $type  results in "dif" or "ful" for differential or full image
      $type  差分或完整映像分别为 "dif" 或 "ful"
      $weekday  is substituted with the first two characters of the Weekday
      $weekday  用星期的前两个英文字符替换
      $year  is substituted with the year (4 digits)
      $year  用年份替换 (4 位)
      $month  is substituted with the month (2 digits)
      $month  用月份替换 (2 位)
      $day  is substituted with the day of the month (2 digits)
      $day  用月份的日期替换 (2 位)
      $hour  is substituted with the hour
      $hour  用小时替换
      $minute  is substituted with the minute
      $minute  用分钟替换
      $second  is substituted with the second
      $second  用秒钟替换
[restore a volume]
[恢复卷]
  Snapshot X:\C-DRIVE.sna C:
[view a saved file]
[查看保存的文件]
  Snapshot X:\C.sna Z: -V
   explores X:\C.sna as virtual drive Z: (-VM for mount only)
   例如 X:\C.sna 作为虚拟驱动器 Z: (-VM 只用于挂载)
   (-VQ for mount only and wait for event. Use --unmount to terminate)
   (-VQ 只用于挂载并等待结果。结束使用 --unmount)
[generate a new hash file from a full image]
[从完整映像产生一个哈希文件]
  Snapshot X:\C.sna -h<HashFileName>
[info about a file]  Snapshot X:\C-DRIVE.sna -I
[文件信息]  Snapshot X:\C-DRIVE.sna -I
[partition info ]  Snapshot X:\C-DRIVE.sna -P
[分区信息 ]  Snapshot X:\C-DRIVE.sna -P
[validate  file ]  Snapshot X:\C-DRIVE.sna -T
[文件产生日期 ]  Snapshot X:\C-DRIVE.sna -T

special operations :
特殊操作 :
--unmount - unmount all virtual disks and terminate Snapshot started with -VQ
--unmount - 卸载全部虚拟磁盘并结束 Snapshot 进度以 -VQ
--unmount:Z - unmount virtual disk Z
--unmount:Z - 卸载虚拟磁盘 Z
--resize X:  - show possible resize range for drive X:
--resize X:  - 显示驱动器 X: 可调整大小范围
--resize X: 1000 - (try to) resize drive X: to 1000 MB
--resize X: 1000 - (尝试) 调整驱动器 X: 大小到 1000 MB
--resizepart X: 1000 - (try to) grow partition and filesystem to 1000 MB
            resizepart is unable to shrink partitions or filesystems!
--resizepart X: 1000 - (尝试) 尝试扩大分区和文件系统到 1000 MB
            调整大小不能缩小分区或文件系统!
--SetPartitionSize HD1 1 130000000  (use with care !!)
--SetPartitionSize HD1 1 130000000  (设置分区大小，谨慎使用 !!)
--exec:"NET START ORACLE"  - execute commands as soon asbackup really started
                           MUST be the last option on the command line!
--exec:"NET START ORACLE"  - 执行命令(网络启动)当备份真正开始时
                           必须放在命令行的最后!
--ClearSignature HD1 清除硬盘签名
--SetSignature HD1 01234567 设置硬盘签名
--Checkboot HD1 - test if HD1 seems to be bootable
--Checkboot HD1 - 测试硬盘 HD1 是否可引导
--Activate X: set active flag for drive X:
--Activate X: 设置驱动器 X: 的激活标志
--Deactivate X: clear active flag for drive X:
--Deactivate X: 清除驱动器 X: 的激活标志
--RestoreMBR HD1 filename - writes the MBR from filename to HD1
--RestoreMBR HD1 filename - 从文件写入 MBR 到 HD1
--RestorePartitionStructure HD1 filename -writes the partition information from filename to HD1
--RestorePartitionStructure HD1 filename -从文件写入分区结构信息到 HD1
--exclude:path excludes the path and all subdirectories from backup
--exclude:path 备份时排除此路径和全部子目录
--exclude:filename1,filename2,...  excludes all given filenames from backup
--exclude:filename1,filename2,...  备份时 backup 排除全部列出的文件
--exclude:@filename.txt exclude from file filename.txt
--exclude:@filename.txt 从文件 filename.txt 排除
--LogFile:filename.log - append log output to file filename.log
--LogFile:filename.log - 日志文件添加输出到 filename.log
--DontLogStdout - don't write VSS log output to standard output
--DontLogStdout - 不将 VSS 日志输出写入到标准输出
--DontLogProgress - don't write the progress report lines to stderr
--DontLogProgress - 不写入进度报告行到 stderr
--novss  - don't use the volume shadow service
--novss  - 不使用卷影服务
--usevss  - use the volume shadow service if available
--usevss  - 如果可能使用卷影服务
--forcevss  - use the volume shadow service. If not available exit with error.
--forcevss  - 使用卷影服务。如果不可用出错退出。
--register:License.lic - register Snapshot
--register:License.lic - 注册 Snapshot
--setdefaultpwd=MyPassword - sets the default password to MyPassword and exits
--setdefaultpwd=MyPassword - 设置默认密码为我的密码并退出
--SearchFull:path1,path2,path3 while working with differential images
            search the full image in the given pathes.
--SearchFull:path1,path2,path3 当使用差分映像时在
            给出的路径搜索完整映像。
--LimitIORate:10  - limits the IO rate to 10MB/s (accepted range 1-100)
--LimitIORate:10  - 限制 IO 速度为 10MB/s (一般可用范围 1-100)
--show HD1 - show size and partitions on HD1
--show HD1 - 显示 HD1 大小和分区
--show    - show size and partitions of all connected hard disks
--show    - 显示所有连接的硬盘的大小和分区
--addDriver  - adds a new Hard Disk Diver to a restored Windows system drive.
            You need the driver.sys and the driver.inf file.
--addDriver  - 添加新硬盘驱动到恢复的 Windows 系统驱动器。
            你需要 driver.sys 和 driver.inf 文件。
--mergeide - corrects IDE driver setup for a restored system disk.
            Use this option if you have IDE disks and your system doesn't
            boot after a restore to different hardware.
--mergeide -  对恢复的系统盘修正 IDE 驱动器驱动。
            如果你是 IDE 磁盘并且从不同的硬件恢复后
            你的系统无法引导时使用此选项。
--QuickCheck:test.sna - performs a quick check of the image with the name
                     test.sna.
--QuickCheck:test.sna - 对文件名为 test.sna 的映像执行快速检查。
BrokenImage.sna --repair:NewImage.sna  - this command can be used to repair
            a broken image
BrokenImage.sna --repair:NewImage.sna  - 此命令可用于修复损坏的映像
-----------------------------------------------------------------------------
scheduling the restore of x:\image-C.sna to C: during the next reboot:
计划任务下次启动是恢复 x:\image-C.sna 到 C: 盘:
snapshot --schedule C: x:\image-C.sna
--autoreboot:off    don't boot after the restore has finished
--autoreboot:off    恢复完成后不重启
--autoreboot:success reboot after the image was successfully restored
--autoreboot:success   映像恢复成功后重启
--autoreboot:any    reboot after the image was restored
--autoreboot:any    映像恢复后重启
--listschedule       list the scheduled restore
--listschedule       恢复计划任务表
--removeschedule    removes the scheduled restore
--removeschedule    移除恢复计划任务