U6自校准流程
测试描述4 Latch
5 Hystersis
6 Head switch
7 Check AFC weights
8 PES screen and RRO ZAP
9 ROM Flashing
B Seek Settling Adaption
C Adaptive notch resonance analysis Test
D Adaptive notch resonance analysis Test
E Constant Velocity Seek test (test for frictional torque)
F Decon/Depop/VSS Scheme for Pes screen test
10 MR offset tuning VGA
11 Write current tuning
13 WP tuning for all zones
14 Read Bias head degradation test
15 VGA tuning
16 Capacity tuning
17 Variable Spare Sector tuning
18 Write Precomp at zone 7
19 VGA tuning
1A FB and FC tuning
1B FB and FC tuning
1C WP tuning for all zones
1D MR offset tuning BER
1E VGA tuning
1F Head data collection
20 Access time
21 Generate AT zone related settings
23 Start-stop / Time to ready
24 Latch Exerciser
25 Track Encroachment
26 Wide head test
27, 28 Seek Error Rate
29 Two Point Seek Test
2A Drive Model Name Modification
2B Servo VGA tuning
2C Skew setting test
2D Reskew drive at AT rom age (use as a diagnostic command)
30 Build defect table
31, 32 Normal Defect scan
33 PES Summary Test
34, 38 Super Sector Scan Summary Test
35, 36 Normal Defect Scan Summary Test
37 Left Adjacent Sector Padding
39 Super Sector Scan for Short & Deep Defect
3A Super Sector Scan for Wide & Shallow Defect
3B Circumferential Scratch Padding and Filling
3C Log Analysis
3D Radial Scratch Padding and Filling
3E Build Final Defect Table
3F AT Rom Flashing
40 ROM Head Map Flashing, Cert/AT secondary overlays check
41 Parameters for error limits
42 Error rate by zone/by head
43 ECC
44 Sequential Read Pass
46 Data transfer rate
48 Seek Error Rate
49 Head data collection
4A Random Write/Read
4B ID Read
4C Read Pack
4D Read/Compare 00 pattern
4E Log checking / Log summary LAJI YIGE!!!!!!!!!!!!!!! 我学会了水才知道知识是海洋。 支持顶一下 路过看看那
页:
[1]