gzluonan 发表于 2010-12-25 19:08:01

这块ST380011A硬盘该如何修

一块ST380011A硬盘，固件区有坏道，开SF，仅几秒，在显示以下内容后，就卡住不走了，BUY灯常亮，断电再开电，还是显示以下相同内容，没法输入任何指令。请问有什么办法可以回到T级或F级指令状态。
4096k x 16 buffer detected
ALPINE - 1_Disk    M.1401-16-03 11:51

Buzz- Head Mask 0000 - Switch to full int.
            Spin Ready
3.5410-02-03 14:56
(P)PATA Reset
Not Interface Age!
Begin Test 02
ASCII logging on

                      Not Power Cycling

Preamp Sent Greater than Max Allowed Bias (0B-0A)

                      Not Power Cycling
Zone 00 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 00 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 00 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 01 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 01 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 01 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 02 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 02 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 02 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 03 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 03 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 03 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 04 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 04 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 04 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 05 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 05 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 05 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 06 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 06 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 06 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 07 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 07 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 07 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 08 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 08 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 08 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 09 Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 09 Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 09 Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0A Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0A Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0A Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0B Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0B Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0B Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0C Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0C Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0C Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0D Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0D Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0D Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0E Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0E Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0E Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0F Head 00 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0F Head 01 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Zone 0F Head 02 adaptives set to defaults

Preamp Sent Greater than Max Allowed Bias (0B-0A)

Preamp Sent Greater than Max Allowed Bias (0B-0A)
Head Mask 0000 -
Read Bias - Head      0   1   2   3
                      B   B   B

HiTemp Bias Head      0   1   2   3
                      B   B   B

P

a397446842 发表于 2010-12-25 22:29:24

P错误把呵呵

ashytools 发表于 2010-12-26 02:03:45

用菜鸟的STR就可以修复了。

LYN_M 发表于 2010-12-31 15:25:42

磁头坏了吧

hanzuju 发表于 2011-1-4 23:01:47

谢谢楼主的无私分享
页: [1]
查看完整版本: 这块ST380011A硬盘该如何修