7200.12 问题求助 指令提示如下
7200.12250g通电敲11下电机停转如何维修
要做数据
谢谢 指令提示如下
Rst 0x08M
Rst 0x08M
Rst 0x08M
No HOST FIS-ReadyStatusFlags 2002B001 Hi to all,
Have this disk that the disk clicks, and dont get ID
Change heads with the same P.ID, and the same think happen.
In Terminal i have this :
Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002B001
Press CTR+Z
happen this:
F3 T>
Spinning Down
HighPowerMode
Spin Down Complete
Elapsed Time 0.104 msecs
Delaying 5000 msec
Jumping to Power On Resetý
Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002B001
Anyone have worked with a disk like this,
Thanks in advanced
Regards
_________________
ZeBong
Top
BadMac Post subject: Re: Seagate 500Gb - 7200.12 BSYPosted: February 12th, 2010, 21:47
Joined: April 1st, 2009, 19:46
Posts: 18
Location: South PacificI'm working on one with the same problem right now, having no success other than confirming its behaving just like 7200.11 BSY but that fix does not work. I am trying variants at present. Maybe ACE have some experience? I will email them asking for support. Please post or PM me if you make any headway.
Top
zebong Post subject: Re: Seagate 500Gb - 7200.12 BSYPosted: February 13th, 2010, 6:56
Joined: December 24th, 2007, 16:08
Posts: 906
Location: EUROPEis your disk clicking 11 times them stop ?
_________________
ZeBong
Top
BadMac Post subject: Re: Seagate 500Gb - 7200.12 BSYPosted: February 24th, 2010, 7:05
Joined: April 1st, 2009, 19:46
Posts: 18
Location: South PacificSorry head down bum up, missed your reply.
Yes it was. I say was as we pulled the plug, another company told the client they could fix it and we hadn't so I sent it on. I am awaiting their results, but I suspect they will get no further than we did. This seems to be a new firmware bug. Very frustrating and I guess we will see many more of them soon as the .12 is very popular right now.
I'm looking forward to getting another one in with more time available to work it right through, or have someone (ACE?) release an update to PC3000 and the Seagate Family manual, with a fix in tow.
Has anybody else dealt with one of these successfully yet? At least say yes so I know that there is a solution.
Top
tonyht Post subject: Re: Seagate 500Gb - 7200.12 BSYPosted: August 17th, 2010, 7:15
Joined: July 27th, 2005, 3:35
Posts: 92zebong wrote:
is your disk clicking 11 times them stop ?
I also have this problems.
Do you have any solution zebong.
Thanks is your disk clicking 11 times them stop ?
看来也是同样的故障啊 http://forum.hddguru.com/seagate-500gb-7200-bsy-t14822.html Hi,
I just successfully repaired one of these drives. What I did was this...
First I removed the PCB and issued the spin down command /2 then Z
Then I put the PCB back onto the drive and spun it up "U"
I then cleared the G-List with the m0,2,2,0,0,0,0,22 command
The drive came ready then I cleared the SMART with the N1 command. The drive now works fine.
哪位有条件测试下？ 我现在单独接电路板不能就绪 ，所以不能继续指令 哪位高人可以？
听说udma可以 ？可惜我没有 没有人关注吗顶上来 电机停转有可能磁头问题 不是磁头问题 ，固件问题，前2天 做了几个，主要是G表满硬盘自己锁死，用K11的指令能修复，但要注意，在PCI下 成功的不多，用COM1口会好很多，还有一些细节要考虑，不然很容易破坏固件导致后期根本就不能恢复，应为风险太大;
页:
[1]
2