Robien 发表于 2018-10-29 05:40:08

Need firmware seagate ST3250310CS DB35.4

本帖最后由 Robien 于 2018-10-29 05:44 编辑

please i need firmware seagate ST3250310CS DB35.4

skdatta 发表于 2018-10-29 10:52:27

i have this ok hdd, but how to extract rom???

帝君 发表于 2018-10-29 17:25:22

What's wrong with this?

Robien 发表于 2018-10-29 20:49:55

skdatta 发表于 2018-10-29 10:52
i have this ok hdd, but how to extract rom???

thanks

use rw s-rom to read rom

then use backup FW to backup full firmare

Robien 发表于 2018-10-29 20:53:52

帝君 发表于 2018-10-29 17:25
What's wrong with this?

bricked firmware ,, main problem was PUIS always on , can not be disabled

i tried with bad fw cause spin up then immediately spin down

hdd not working any more

帝君 发表于 2018-10-30 07:53:32

Robien 发表于 2018-10-29 20:53
bricked firmware ,, main problem was PUIS always on , can not be disabled

i tried with bad fw...

Firmware problem you try brush will be the original firmware.

Robien 发表于 2018-10-30 09:57:39

帝君 发表于 2018-10-30 07:53
Firmware problem you try brush will be the original firmware.

Port is locked .no access to sa . how to brush this hdd .. i need fw or steps to brush it

If you have fw please share it

Robien 发表于 2018-10-30 10:02:53

帝君 发表于 2018-10-30 07:53
Firmware problem you try brush will be the original firmware.

I had a similar once . Port was locked too .after searching i found unlocked hdd . got my backup . so i wrote the rom to unlock port .. then wrote app cert table then ata & it worked like magic .. if any one have a solution or steps or fw .. please help

帝君 发表于 2018-10-30 10:39:30

Robien 发表于 2018-10-30 10:02
I had a similar once . Port was locked too .after searching i found unlocked hdd . got my backup . ...

I don't know much about hardware or anything. Let's wait and see.

Robien 发表于 2018-10-30 15:40:46


Port is locked .no access to sa . how to brush this hdd .. i need fw or steps to brush it

If you have fw please share
页: [1] 2
查看完整版本: Need firmware seagate ST3250310CS DB35.4