ucsoom 发表于 2016-6-6 18:49:10

在国外网站看到的一些F3指令

本帖最后由 ucsoom 于 2016-6-6 18:51 编辑

Hello all international friends
Today I will share with you the basic commands used for terminal F3T:

Command rebuilt slip list(V1) m0,2,1,,,,,22
Command rebuilt g list(V2) m0,2,2,,,,,22
Command rebuilt P list(V3) m0,2,3,,,,,22

Command zero fill with slip list m0,5,1,10,3,,,22
Command zero fill with G list m0,5,2,10,3,,,22
Command zero fill with P list m0,5,3,10,3,,,22

Command format with slip list m0,8,1,10,3,,,22
Command format with G list m0,8,2,10,3,,,22
Command format with P list m0,8,3,10,3,,,22

Command repair bad sector by Slip list m0,D,1,,,,,22
Command repair bad sector by G list m0,D,2,,,,,22
Command repair bad sector by P list m0,D,3,,,,,22

Command format (seacos XF ) by Slip list m0,20,1,,,,,22
Command format(seacos XF) by G list m0,20,2,,,,,22
Command format (seacos XF) by P list (most power full to repair bad sector and red and green blocks)
m0,20,3,,,,,22
Comman for erasing of all sector m0,5,1,,,,,22
Comman for formatting hard disk sectors m0,8,2,,,,,22
NOTE : Yes some of the listed commands will ERASE ALL THE USER DATA

szdnkx 发表于 2016-6-12 09:34:05

seacos XF什么意思?

bobofu2012 发表于 2016-6-6 20:55:29

very good. thank you very much.

梁程 发表于 2016-6-9 18:39:40

Command repair bad sector by Slip list m0,D,1,,,,,22 ,好像是修V40，用过一次，发现硬盘数据没了，郁闷。。。。。。。

dra2918 发表于 2016-6-10 23:20:00

既然能信手拿来 何不也随口翻译 岂不更OK乎

hpwlab 发表于 2016-6-12 04:06:59

there are some error , like m0,2,3,,,,,22 = RebuildP-listthis is not True
even if you Clear Plist in level 1 > G6A and try to rebuild p-list this will not work

szdnkx 发表于 2016-6-12 09:26:34

你还能打开国外网站. 谢谢. 我们都打不开了.
页: [1]
查看完整版本: 在国外网站看到的一些F3指令