Anonymous 发表于 2007-7-14 00:06:54

How to clone USB Drive

Dear : All

I use copyr or media tool prof to clone badsector HDD; but the software don`t support USB drive.

Is there software that support to clone badsector USB drive ?

Anonymous 发表于 2007-7-14 00:07:10

Hi,
Can You Share Your Problem You Have Now ,Software Will See Drive if Electronics Are Good

Anonymous 发表于 2007-7-14 00:07:24

The USB drive detect in winxp but partition is RAW and I run getdataback for FAT32 and in LBA ...., appear message : read error; I skip this error; but next time appear message again and I skip; the process until finish need two hour.

I can recover 80% JPEG; but 10% is corrupt.
I check USB drive with HDDscan; and I see few badblock;
The USB drive tend to broken, so I will clone USB drive to another;
How to do this ? please

thanks for your reply

Anonymous 发表于 2007-7-14 00:07:36

Tip of The Day,

Resolder everything ,Try Works Good ,Otherwise Keep Resoldering And Trying .Remeber To Clean And Dry the Flux Using FLux Cleaning Solution Like IPA Etc

Anonymous 发表于 2007-7-14 00:07:53

Media tools could work with the usb if u install usb driver for DOS .

Anonymous 发表于 2007-7-14 00:09:39

Rameez,
Is Media Tools Your Most Lovable Tool .How You Rates This To Other Solutions

Anonymous 发表于 2007-7-14 00:09:51

i suggest everyone to use Media tools because it is real fast and can clone from bad sectors and also i have recovered many files from this tool which others where not able to find .

Anonymous 发表于 2007-7-14 00:10:04

Winhex its very good too for clone

scott 发表于 2008-4-11 02:27:14

Resolder will not help cause you're having bad sectors on your hard drive, and nothing wrong with your external drive enclosure or drive circuit. There's small hardware tool call Hard drive duplicate tools or so, it you have access that would be the best solution. If not, try do the cloning in software way, try 'bad copy' or any advanced software in that catagory.
Good luck.
页: [1]
查看完整版本: How to clone USB Drive