csdn 发表于 2014-10-21 09:11:48

SIM ERROR 1009 RW ERROR 00000080 (17a sys. file)

We have a Seagate F3 drive with following terminal report:
Rst 0x10M
RW: Disc Ctlr Initialization Completed.
(P) SATA Reset
SIM Error 1009
RW Error 00000080

If you try to read sectors terminal showing:

LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B

You should try to find damaged FID in System Files. It could be 133 and 17a. To check 17a sys.file use terminal command:

T>r17a

If you get message DiagError 0000000E, then this sys. file is damage and you need to fix it.
Perform a Ctrl+L terminal command for find out a family of drive:

F3 T>

Sentosa Banshee RAP17 8hd 2.1 4k 16MB QNC blk servo ntch

Product FamilyId: 55, MemberId: 01

HDA SN: W100EN75, RPM: 5399, Wedges: 160, Heads: 6, OrigHeads: 8, Lbas: 00000E92B60C, PreampType: 66 53

PCBA SN: 0000M2115FU3, Controller: BANSHEEST_2_0(8000)(4-00-0-0), Channel: Unknown, PowerAsic: MCKINLEY MOBILE PLUS Rev 8C, BufferBytes: 1000000

Package Version: SNG11C.CCD9.BP0694.CC9F , Package P/N: 100670205, Package Global ID: 00410638,

Package Build Date: 04/19/2011, Package Build Time: 12:03:54, Package CFW Version: SNG1.CCD9.00323780.00410638,

Package SFW1 Version: C114, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----

Controller FW Rev: 04191203, CustomerRel: CC9F, Changelist: 00323780, ProdType: SNG1.CCD9, Date: 04/19/2011, Time: 120354, UserId: 00410638

Servo FW Rev: C114

RAP FW Implementation Key: 11, Format Rev: 0202, Contents Rev: 48 B4 03 0D

Features:

- Quadradic Equation AFH enabled

- VBAR with adjustable zone boundaries enabled

- Volume Based Sparing enabled

- IOEDC enabled

- IOECC enabled

- DERP Read Retries enabled

- LTTC-UDR2 compiled off

This is Sentosa hard drive.
For fix this sys.file we need to write it.
This file filling by 0, but very important it size. You can download it or create manually (it size = 0xA1F0).


Open this sys.file

Open sys file

Then use "Load" button for loading 17a sys.file then clear S.M.A.R.T.

use "Load" button

Try to read sectors.
If sectors still not reading - create a backup of 28 and 35 sys.files and perform "Translator regeneration".

If you check 133 sys.file and it damaged - you need to write it (this is 9 module) and try to read sectors.

yjclane 发表于 2014-10-21 09:51:25

good good,很好的资料

会成功的人 发表于 2014-12-1 21:11:49

不错，很好的资料。

laxiaota 发表于 2014-12-4 17:35:22

17A 133模块，好资料！

raj2008_bir 发表于 2014-12-4 19:33:39

thank you very good work

yufengrw 发表于 2014-12-20 22:26:02

好资料呀明天试试

硬盘维修工 发表于 2015-1-5 22:00:45

精品教程，不顶不行

Spruts80 发表于 2015-2-5 02:28:45


thanks for the file.

gggg1203 发表于 2016-12-25 07:36:59

学习学习。

hhbbaabb 发表于 2018-10-5 14:11:58

谢谢楼主分享
页: [1]
查看完整版本: SIM ERROR 1009 RW ERROR 00000080 (17a sys. file)