livvli 发表于 2013-4-30 09:18:29

WD1950写死ROM后

WD1950写死ROM后电机停转通电无反应，拆下25X20用编程器写完后还是没反应。
是ROM没写对，还是不能用编程器写。
有试过的说说呀

delete 发表于 2013-4-30 12:03:45

你写入的rom和源文件对比就知道写入没

明月。福Q 发表于 2013-4-30 16:23:24

有的192KB的编程器不好用的。

老兵 发表于 2013-4-30 20:30:13

完全可以用编程器写呀，我原来是280U的，支持不了，后来我花了100多买了个升级成580U的芯片焊上，现在OK，前几天还刷了个1640 002的ROM呢！

scq330 发表于 2013-4-30 22:41:39

512k的rom,我用编程器写的也不转,不知道是不是没写对,rom是校验过的,百分百写完整进去了.就是不知道原rom,我找了个差不多的写,但不转....

livvli 发表于 2013-5-1 22:30:55

试了好几个，才发现是ROM不配的原因，用编程器是可以写成功的，现在已起转，正在开效准。明天才能知道结果 ，开前忘记写SN号和容量了，不知道能成功不
TP3200AAJS FW:05.04E05 SN:0000000000000 (ROYL selected) port 0xD080
Logical: Cyls 16383, Heads 16, Sectors 63, LBA 625142448, 320Gb
Controller Buffer Size: 8192Kb
Family: Pinnacle Lite (Royl)



livvli 发表于 2013-5-2 14:40:06

2013-5-2 08:05:50 Power On Reset Immediate - FFFF=NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG- NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG - NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG - -
TP3200AAJS FW:05.04E05 SN:0000000000000 (ROYL selected) port 0xD080
Logical: Cyls 0, Heads 0, Sectors 0, LBA 625142448, 320Gb
Controller Buffer Size: 8192Kb
Family: Pinnacle Lite (Royl)





2013-5-2 08:12:30 Enable PST Mode - OK
2013-5-2 08:24:55 C4 - heads read and write parameters / cornice height adjustment - SUCCESS by
2013-5-2 08:24:55 C3 - adjust the track density - Start
2013-5-2 08:57:10 C3 - adjust the track density - UNKNOWN ERROR C409
2013-5-2 08:57:10 C8 - adjust the sector density - Start
2013-5-2 09:10:02 C8 - adjust the sector density - UNKNOWN ERROR C409
2013-5-2 09:10:02 B1 - Simple test - Start
2013-5-2 09:20:09 B1 - Simple test - UNKNOWN ERROR C409
2013-5-2 09:20:09 C4 - heads read and write parameters / cornice height adjustment - Start
2013-5-2 09:41:20 C4 - heads read and write parameters / cornice height adjustment - UNKNOWN ERROR C409
2013-5-2 09:41:20 D1 - scan defects (write) and joined the LOG - Start
2013-5-2 11:03:27 D1 - scan defects (write) and joined the LOG - UNKNOWN ERROR C409
2013-5-2 11:03:27 DD - Test Gain Cal - Start
2013-5-2 11:03:46 DD - Test Gain Cal - UNKNOWN ERROR C409
2013-5-2 11:03:46 DB -- Start
2013-5-2 13:13:32 DB -- SUCCESS by
2013-5-2 13:13:32 D5 - test cluster - Start
2013-5-2 14:00:40 Disable PST Mode - SUCCESS by
2013-5-2 14:01:18 Disable PST Mode - SUCCESS by
2013-5-2 14:01:21 Power On Reset Immediate - C409=UNKNOWN ERROR C409- UNKNOWN ERROR E633
IBI Common Log:

Test Count 4 - 03:31:21
1    D1   0   0   1   101:22:0101:22:01
2    DD    DD   0   1   100:00:1800:00:18
3    DB    DB   0   1   102:09:0202:09:02
4    D5    D5   0   3   000:00:0000:00:00

Abort Section:
Test ID: 0 , Test Status: 0 , Abort Code: 0- IBI_ERROR_CODE_BASE
Test ID: 0 , Test Status: 0 , Abort Code: 0

Soft Error Counter:10429, Soft Error Total:10429

SPT Defect Statistical Chart
Head 0 = 39570   ( Tracks: 564    , Sectors: 39006, Max: 53330)
Head 1 = 20535   ( Tracks: 572    , Sectors: 19963, Max: 53330)

不知道哪里出问题了，固件区？还是固件版本？到D5不动了

303251453 发表于 2013-8-19 07:19:21

livvli 发表于 2013-5-1 22:30 static/image/common/back.gif
试了好几个，才发现是ROM不配的原因，用编程器是可以写成功的，现在已起转，正在开效准。明天才能知道结果...

用的什么编程器详细说下吧

南极宝宝 发表于 2014-12-4 12:24:19

NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG啥问题

shiqiang798304 发表于 2014-12-6 08:28:32

NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG啥问题
页: [1] 2
查看完整版本: WD1950写死ROM后