老大IBM:IC35L040AVVN07-0加载NVR后出现如下问题如何解决??
IBM:IC35L040AVVN07-0用安全模式加载NVR后,跳线回正常模式进入显示如下:
selected family..............................................:AVVN
Model by ID...................................................:<ID IS NOT READ>
NV-RAM reading ...........................................:OK
NV-RAM ID...................................................VATOAFOC
NV-RAM reading...........................................:OK
NV-RAM data correction...............................:OK
]NV-RAMwriting..........................................:OK
Switching SA access.....................................:OK
NV-RAM reading...........................................:OK
NV-RAM ID........................................:VATOAFO
Sellected family........................:AVVN
Model by ID..............................:<ID IS NOT READ>
loading module table ...................:Error
error:.............................................:Module not read
Loading the table of "open" modules ....................error
module ZONE is not ound!......................................:error executing loading "open"modules dir command
BSY DRD DSC 三个灯常亮！！
页:
[1]